Programmatically changing wireless router settings - Netgear ideally

wireless router api
nighthawk api
netgear orbi api
pynetgear
tp-link router api
pynetgear enhanced
netgear switch api
netgear github

Is it possible to programmatically change settings on a Netgear wireless router using C#? I have settings that I change often and I would like to create my own interface for making those changes. Currently I navigate to the admin web page (10.0.0.1) and it prompts me for a username and password. After I authenticate I can use the web interface to change the router's configuration.

If this isn't possible with Netgear, do any outher wireless routers have an API for developers?

There aren't any APIs out there to do this, but you can write something to make HTTP requests to the router to simulate the webUI being used.

I'm guessing most consumer routers are probably pretty simple to talk to. Authentication is probably nothing more than basic realm.

Programmatically changing wireless router settings, Programmatically changing wireless router settings - Netgear ideally. Selenium offers a firefox plugin that lets you record manual interactions� To change the wireless mode of your NETGEAR router: Visit http://www.routerlogin.com or http://www.routerlogin.net on a computer or Wi-Fi device that is connected to your NETGEAR router. Enter the default username ( admin) and the default password ( password ). Click OK or Log In.

Selenium offers a firefox plugin that lets you record manual interactions with your browser. And then you can export the steps to python, ruby, java or c#. It worked for me to programmatically adjust my router settings to turn off wifi. Clicking on the elements while recording identifies everything you need.

This code works on an Actiontec MI424WR (FIOS) Edit the code to add your username, password, and router address.

from selenium import webdriver
from selenium.webdriver.common.by import By
from selenium.webdriver.common.keys import Keys
from selenium.webdriver.support.ui import Select
from selenium.common.exceptions import NoSuchElementException
from selenium.common.exceptions import NoAlertPresentException
import unittest, time, re

class Routr(unittest.TestCase):
    def setUp(self):
        self.driver = webdriver.Firefox()
        self.driver.implicitly_wait(30)
        self.base_url = "http://routerip_or_address"
        self.verificationErrors = []
        self.accept_next_alert = True

    def test_routr(self):
        driver = self.driver
        driver.get(self.base_url + "/")
        driver.find_element_by_name("user_name").clear()
        driver.find_element_by_name("user_name").send_keys("your_username")
        driver.find_element_by_id("pass2").clear()
        driver.find_element_by_id("pass2").send_keys("enter_your_password_here")
        driver.find_element_by_link_text("OK").click()
        driver.find_element_by_link_text("Change Wireless Settings").click()
        driver.find_element_by_id("ws_off").click()
        driver.find_element_by_link_text("Apply").click()

    def is_element_present(self, how, what):
        try: self.driver.find_element(by=how, value=what)
        except NoSuchElementException, e: return False
        return True

    def is_alert_present(self):
        try: self.driver.switch_to_alert()
        except NoAlertPresentException, e: return False
        return True

    def close_alert_and_get_its_text(self):
        try:
            alert = self.driver.switch_to_alert()
            alert_text = alert.text
            if self.accept_next_alert:
                alert.accept()
            else:
                alert.dismiss()
            return alert_text
        finally: self.accept_next_alert = True

    def tearDown(self):
        self.driver.quit()
        self.assertEqual([], self.verificationErrors)

if __name__ == "__main__":
    unittest.main()

[PDF] Nighthawk AC1900 Smart WiFi Router, User Manual. Nighthawk AC1900 Smart WiFi Router. Model R7000. NETGEAR, Inc. 350 E. Plumeria Drive. January 2019. San Jose, CA 95134, USA. NETGEAR recommends that you do not change your preset security settings. If you change your preset security settings, make a note of the new settings and store it in a safe place where you can easily find it. If you use a wireless computer to change the wireless network name (SSID) or other wireless security settings, you are disconnected when you click Apply. To avoid this problem, use a computer with a wired connection to access the router.

I'm unaware of any consumer-grade routers that have an API like that, but you could always build something that (ab)uses the Web interface to do what you want, using something like selenium-rc or watir

How do I change my NETGEAR router's WiFi password or , Launch an Internet browser and type http://www.routerlogin.net into the address bar. Enter the router user name and password when prompted. Programmatically changing wireless router settings-Netgear ideally . Is it possible to programmatically change settings on a Netgear wireless router using C#? I have settings that I change often and I would like to create my own interface for making those changes. Cu…

MiktoTik sells customer grade routers that allow ssh configuration (mind that they use ssh, but not bash inside ssh). You can even roll your own PHP REST API for router (not that I like PHP, but people are doing it).

[PDF] NETGEAR AC1750 Smart WiFi Router Model R6400 User Manual, Chapter 2 Connect to the Network and Access the Router. Connect to the Network. Change NETGEAR USB Control Center Settings . Use the WPS Wizard for WiFi Connections . Internet account. Most ISPs use dynamically assigned IP addresses. The ideal password contains no dictionary words from any language� Look for a Setup or Wireless Setup subsection; they're usually located on the left side or top of the window. In the Wireless Setup menu, enter you're preferred router name and password in the for the Name (SSID): and Passphrase: sections. Click the button to save the new settings, and then exit the router configuration screen.

If this is just a few things you want to change programmatically, simulating HTTP requests should be simple enough. Another option would be to install DD-WRT in your router, basically transforming it into a small Linux installation that allows full programmatic configuration through SSH using standard Linux commands.

How do I log in to my NETGEAR home router? | Answer, If you need help setting up your router, see How do I set up and install my mobile device is connected to your NETGEAR router's WiFi network. I'm looking for a way to set an external authentication server that will work on many/most wireless routers. Or , alternatively several ways that will work on different wireless routers. It needs to be done programmatically, meaning, that a computer connected to the router needs to be able to use some api maybe to do this.

How to set up a wireless router, Setting up a wireless router doesn't have to be an ordeal. through your walls to that ideal central location (one cable to connect the router to Host Configuration Protocol Server, which dynamically assigns IP address to the� I even tried contacting Netgear support, but they were less accessible than the crew of the Marie Celeste. I am pretty sure that the problem lies with the router. Yesterday I noticed that the table of attached devices was shuffled. The device names and types were not those of the IP address and were changing each time I went back.

How To Turn Off Someones Wifi With Ip, Many basic features such as turning off the iPhone have changed and require a new key combination. Now For doing this you will need to know the IP address of your WiFi router. such as your smartphone, tablet, or PC to your NETGEAR wireless network. How to turn on/off wifi hotspot programmatically in Android 8. Is it possible to programmatically push files to a wireless SD card - like a www.eye.fi card? I use a Mac and thought I could do this using some AppleScript - but have not found a way

Managing wireless network connection in C#, We're planning on allowing the user to connect to available wireless networks. Programmatically changing wireless router settings - Netgear ideally � How to� Discuss R6000 Series, Wireless N, and Legacy Routers × We are experiencing an outage with Chat Support, Knowledgebase Articles and guided assistance. Planned maintenance event for the NETGEAR Blog site that is scheduled to begin at 11 p.m PT on Friday 7/12/2019 lasting 1 hour.

Comments
  • Basic realm authentication is correct. I can get logged in, but I'm not sure how to determine what HTTP requests to send to the router to simulate a user navigating the UI. Any suggestions?
  • Well, you have two options: 1: Reverse engineer the Web UI 2: Use a system like firebug to see how the requests are going across. I would recommend number 2.
  • I agree use a web debug proxy like fiddler
  • I just did this for my WNDR3300 Netgear. Fiddler makes this a breeze. Just make sure you specify your Content-Length or the request body (in my experience) is ignored.
  • One minor correction... The MikroTik API is not a REST API. It's a proprietary L7 protocol (ala SSH, FTP) that MikroTik confusingly call "API". There are multiple client implementations for the protocol... Including ones in C# actually.
  • @Tiw I'll definitely add more details. I'll have to dig for the SOAP schema in Github, should be able to be used by any language that can make SOAP calls.