Git: Cannot see new remote branch

git checkout remote branch
git fetch remote branch
git track remote branch
git show remote branches
git branch
git switch branch
git delete remote branch
git delete local branch

A colleague pushed a new remote branch to origin/dev/homepage and I cannot see it when I run:

$ git branch -r

I still see preexisting remote branches.

I assume this is because my local remote refs are not up-to-date hence when I ran a git pull nothing happened since git pull only pulls on the current working branch correct? Unlike git push which pushes all branches that have changes to the corresponding remote branch?

First, double check that the branch has been actually pushed remotely, by using the command git ls-remote origin. If the new branch appears in the output, try and give the command git fetch: it should download the branch references from the remote repository.

If your remote branch still does not appear, double check (in the ls-remote output) what is the branch name on the remote and, specifically, if it begins with refs/heads/. This is because, by default, the value of remote.<name>.fetch is:


so that only the remote references whose name starts with refs/heads/ will be mapped locally as remote-tracking references under refs/remotes/origin/ (i.e., they will become remote-tracking branches)

Git Fetch, The git fetch command imports commits from a remote repository into your lets you see how the central history has progressed, but it doesn't force you to immediately execute git merge to create a merge commit for the new remote content. Git Checkout Remote Branch Definition. Git checkout remote branch is a way for a programmer to access the work of a colleague or collaborator for the purpose of review and collaboration. There is no actual command called “git checkout remote branch.” It’s just a way of referring to the action of checking out a remote branch.

Check whether .git/config contains

[remote "origin"]
    url = …
    fetch = +refs/heads/master:refs/remotes/origin/master

If so, change it to say

[remote "origin"]
    url = …
    fetch = +refs/heads/*:refs/remotes/origin/*

Then you should be able to use it:

$ git fetch
remote: Counting objects: …
remote: Compressing objects: ..
Unpacking objects: …
remote: …
From …
 * [new branch]            branchname -> origin/branchname
$ git checkout branchname
Branch branchname set up to track remote branch branchname from origin.
Switched to a new branch 'branchname'

Remote Branches, Remote-tracking branches are references to the state of remote branches. They' re local references that you can't move; Git moves them for you For instance, if you wanted to see what the master branch on your origin remote looked like as of the You can add it as a new remote reference to the project you're currently� This tutorial will help you to list remote branches available on the remote git repository. It is helpful you to find names of branches, which have been created on the remote repository by someone and you want to check out this on your local repository.

The simplest answer is:

git fetch origin <branch_name>

Can't find a simple way to pull all new branches off remote, what am , (If origin/newfeature doesn't exist either, it will return an error.) If you run git branch -a , you'll see all remote branches as well as local ones. Between those two� I just created a new feature branch from the project branch for another JIRA ticket. I can see it in Bitbucket, however still the same, git branch --remote can only see the project branch but cannot find this new feature branch. And this new feature branch does not show up in REMOTES/origin in Sourcetree.

Doing a git remote update will also update the list of branches available from the remote repository.

If you are using TortoiseGit, as of version, you can do "Git -> Sync" and there will be a "Remote Update" button in the lower left of the window that appears. Click that. Then you should be able to do "Git -> Switch/Checkout" and have the new remote branch appear in the dropdown of branches you can select.

Git checkout remote branch � GitHub, With the remote branches. //in hand, you now need to check out the branch you are interested in, giving. //you a local working copy: git checkout -b test origin/test. $ git branch * master $ git branch commit-branch 735c5b4 $ git branch commit-branch * master You can also use the git checkout -b <branch-name> <hash> syntax, which will create the branch and check it out, all in one command. Creating a Branch from a Tag. Much like creating a branch from a commit, you can also create a branch from a tag.

Let's say we are searching for release/1.0.5

When git fetch -all is not working and that you cannot see the remote branch and git branch -r not show this specific branch.

1. Print all refs from remote (branches, tags, ...):

git ls-remote origin Should show you remote branch you are searching for.

e51c80fc0e03abeb2379327d85ceca3ca7bc3ee5        refs/heads/fix/PROJECT-352
179b545ac9dab49f85cecb5aca0d85cec8fb152d        refs/heads/fix/PROJECT-5
e850a29846ee1ecc9561f7717205c5f2d78a992b        refs/heads/master
ab4539faa42777bf98fb8785cec654f46f858d2a        refs/heads/release/1.0.5
dee135fb65685cec287c99b9d195d92441a60c2d        refs/heads/release/1.0.4
36e385cec9b639560d1d8b093034ed16a402c855        refs/heads/release/1.0
d80c1a52012985cec2f191a660341d8b7dd91deb        refs/tags/v1.0

The new branch 'release/1.0.5' appears in the output.

2. Force fetching a remote branch:

git fetch origin <name_branch>:<name_branch>

$ git fetch origin release/1.0.5:release/1.0.5

remote: Enumerating objects: 385, done.
remote: Counting objects: 100% (313/313), done.
remote: Compressing objects: 100% (160/160), done.

Receiving objects: 100% (231/231), 21.02 KiB | 1.05 MiB/s, done.
Resolving deltas: 100% (98/98), completed with 42 local objects.
From http://git.repo:8080/projects/projectX
 * [new branch]        release/1.0.5 -> release/1.0.5

Now you have also the refs locally, you checkout (or whatever) this branch.

Job done!

How to List Remote Branches in Git – TecAdmin, It is helpful you to find names of branches, which have been created on the remote repository by someone and you want to check out this on your� In order to see this newly published branch, you will have to perform a simple "git fetch" for the remote. Using the "git checkout" command, you can then create a local version of this branch - and start collaborating! git checkout for Remote Branches. The syntax for making git checkout "remote-ready" is rather easy: simply add the "--track

Git Show Remote Branches – Linux Hint, However, when dealing with local and remote branches, it can get a little bit complicated. project.git/. Now go to a new location where you can create a clean folder. Create the Let's check our branches (still in the project_source folder):. Just like the branch name “master” does not have any special meaning in Git, neither does “origin”. While “master” is the default name for a starting branch when you run git init which is the only reason it’s widely used, “origin” is the default name for a remote when you run git clone.

git checkout a Remote Branch, In order to see this newly published branch, you will have to perform a simple "git Based on the remote branch "origin/newsletter", we now have a new local� The following pull command downloads / fetches the content of the remote repository. However, it will not create a new merge commit: $ git pull –no-commit <remote> Performing pull operation via Git GUI. If you are a fan of GUI rather than using command line then you may also use Git GUI for performing pull remote operation.

Check out a remote branch in git, Check out a remote branch in git. If you would This will automatically track origin/groups from a local branch groups . In older Git Check out our new e- book:. $ git branch bt-tst2 $ git branch br-tst3. This is followed by creating remote branches: $ git push origin br-tst1 $ git push origin br-tst3. So, we have three local and two remote branches apart from the master branch in both repositories. Showing all branches example. For listing all branches – in local and remote repositories, run this

  • A related problem - Can't see remote branch
  • managed to forget git pull, thanks
  • I was able to see the new remote branch after doing a git fetch origin, but not sure what the difference is if I just did a git fetch? I read about git remote update, but wasn't clear what that would have done. Would I need to run git fetch for any new remote branches from here on out?
  • @hybrid9 If you use git fetch, git will download the references from the default remote repository that has been specified in .git/config: usually it will be called origin, so both commands are equivalent, but your specific configuration might be different for some reason. No, you don't need to give git fetch for every branch, as (by default) it fetches all branches.
  • @hybrid9 git pull is equivalent to git fetch + git merge (or git rebase if you have changed defaults), so you can keep using git pull as usual, and the new remote branches will pop up by themselves.
  • I originally ran git pull but i never saw that new remote branch which really confused me. Only until i ran git fetch origin. I appreciate the time in answering my questions.
  • @hybrid I have the same issue. git ls-remote gerritrepo:project shows the new remote branch but git branch -a does not...I have to make another clone and only then the new branch will appear
  • This happened to me after an initial shallow clone.
  • Perfect!!! Thanks a lot! That happened to me when installing a custom Homebrew tap with the command brew tap user/repo: the local copy of the repo cloned by brew had the settings you mentioned and it was not possible to see and use the other branches I had in my repo. Thanks again! :) +1!
  • The following command can be used instead of manual editing the .git/config file. git config remote.origin.fetch "+refs/heads/*:refs/remotes/origin/*" and then git fetch origin to get all branches on origin.
  • this is a nice one!