Angular2 Quick Start Error
this is probably not a problem with npm. there is likely additional logging output above.
npm err code elifecycle npm err errno 1 angular
I want to use Angular2 so I started tutorial from official website https://angular.io/docs/ts/latest/quickstart.html
I just copy past the code And at the end I run commands :
$ npm install -> ok
$ npm start
> email@example.com start /home/pln/dev/myprojects/myprojects/myapp-front > concurrent "npm run tsc:w" "npm run lite"   > firstname.lastname@example.org tsc:w /home/pln/dev/myprojects/myprojects/myapp-front  > tsc -w    > email@example.com lite /home/pln/dev/myprojects/myprojects/myapp-front  > lite-server   [BS] Access URLs:  -------------------------------------  Local: http://localhost:3000  External: http://192.168.0.47:3000  -------------------------------------  UI: http://localhost:3001  UI External: http://192.168.0.47:3001  -------------------------------------  [BS] Serving files from: ./  [BS] Watching files...  09:04:01 - Compilation complete. Watching for file changes.  [BS] File changed: app/app.component.js  [BS] File changed: app/boot.js  events.js:85  throw er; // Unhandled 'error' event  ^  Error: watch ENOSPC  at exports._errnoException (util.js:746:11)  at FSWatcher.start (fs.js:1172:11)  at Object.fs.watch (fs.js:1198:11)  at createFsWatchInstance (/home/pln/dev/myprojects/myprojects/myapp-front/node_modules/lite-server/node_modules/browser-sync/node_modules/chokidar/lib/nodefs-handler.js:37:15)  at setFsWatchListener (/home/pln/dev/myprojects/myprojects/myapp-front/node_modules/lite-server/node_modules/browser-sync/node_modules/chokidar/lib/nodefs-handler.js:80:15)  at FSWatcher.NodeFsHandler._watchWithNodeFs (/home/pln/dev/myprojects/myprojects/myapp-front/node_modules/lite-server/node_modules/browser-sync/node_modules/chokidar/lib/nodefs-handler.js:228:14)  at FSWatcher.NodeFsHandler._handleFile (/home/pln/dev/myprojects/myprojects/myapp-front/node_modules/lite-server/node_modules/browser-sync/node_modules/chokidar/lib/nodefs-handler.js:255:21)  at FSWatcher.<anonymous> (/home/pln/dev/myprojects/myprojects/myapp-front/node_modules/lite-server/node_modules/browser-sync/node_modules/chokidar/lib/nodefs-handler.js:473:21)  at FSReqWrap.oncomplete (fs.js:95:15)   npm   ERR!  Linux 3.16.0-56-generic  npm  ERR! argv "/usr/bin/node" "/usr/bin/npm" "run" "lite"  npm ERR! node  v0.12.9  npm ERR! npm  v2.14.9  npm  ERR! code ELIFECYCLE  npm  ERR! firstname.lastname@example.org lite: `lite-server`  npm  ERR! Exit status 1  npm  ERR!  npm  ERR!  Failed at the email@example.com lite script 'lite-server'.  npm ERR! This is most likely a problem with the myapp-front package,  npm ERR! not with npm itself.  npm ERR! Tell the author that this fails on your system:  npm ERR! lite-server  npm ERR! You can get their info via:  npm ERR! npm owner ls myapp-front  npm ERR!  There is likely additional logging output above.   npm ERR! Please include the following file with any support request:  npm  ERR! /home/pln/dev/myprojects/myprojects/myapp-front/npm-debug.log  npm run lite exited with code 1
What can I do ?
Well, a quick Google will lead you here, or any number of other places that will tell you that
ENOSPC means that there is not enough space to install what you're trying to install on the drive you're trying to install it to.... so free some space and run it again.
Angular2 quickstart example installation error · Issue #4634 , etc. unzipping quickstart-master.zip and run npm install. The log given by the failure. Normally this include a stack trace and I am new to angular and I have been trying to learn more about angular2. I have followed the getting started guide to create the angular2-quickstart project. However when I am running the command npm start, the browser start but everythi
Refer the below code to avoid ENOSPC
echo fs.inotify.max_user_watches=524288 | sudo tee -a /etc/sysctl.conf && sudo sysctl -p
Angular 2 QuickStart Live-server error · Issue #6097 · angular , 23 error If you do, this is most likely a problem with the angular2-quickstart package, 23 error not with npm itself. 23 error Tell the author that this Teams. Q&A for Work. Stack Overflow for Teams is a private, secure spot for you and your coworkers to find and share information.
Do npm clean. Then do npm install, npm start.
Configure Angular Quick Start Source In Visual Studio 2017, This article explains how to quick start Angular 2 using visual studio 2007. We will be getting an error if both are not installed while executing I know Angular2 beta has just been released but I can't reproduce the steps from their official site tutorial ( https://angular.io/guide/quickstart ). Maybe someone
Auth0 Angular SDK Quickstarts: Login, This tutorial demonstrates how to add user login to an Angular (versions 2 and is not set, users will be unable to log in to the application and will get an error. I am trying to learn Angular 2 and start following quickstart a few days ago. I ran into the exact same issue as stefanstelzer. Using 2.0.0-RC1 instead of master solved the issue.
Unable to install angular quick start due to typings folder, Hello, I'm trying to install the Angular 2 packages to do the quick start stack Error: firstname.lastname@example.org typings: `typings "install"` 13 The Angular Quickstart project was a nice starting point for creating Angular applications. Now we recommend using the Angular CLI to create new Angular projects. Starting from 1 November 2017, all the Angular documentation, at angular.io , is based on the Angular CLI.
Setup, Getting Started helps you quickly learn the essentials of Angular, in the context of This setup guide uses the npm client command line interface, which is If you go directly to the StackBlitz online development environment and choose to start a new Angular workspace, you get a generic stub application, rather than this illustrative sample. Once you have been introduced to the basic concepts here, this can be helpful for working interactively while you are learning Angular.
- It works : echo fs.inotify.max_user_watches=524288 | sudo tee -a /etc/sysctl.conf && sudo sysctl -p
- @Maryo that worked for me as well..what exactly does that do?