How to access site running apache server over lan without internet connection

access apache server on local network
unable to access apache server remotely
access localhost from another computer on different network
unable to connect to local apache server
can t access apache2 web server
can't access apache from another machine
how to access localhost from another computer
apache2 local network

I am running a server on Windows XP SP2 computer using EasyPhp. Lets call it computer_1. The ip address of computer is 192.168.1.2

Now I have another computer ( computer_2) on the lan with ip address 192.168.1.3

I want to access the site on computer_1 from computer_2.

comupter_2 can ping computer_1 (ping 192.168.1.2 works)

But when I type http://192.168.1.2 in the browser of computer_2, nothing happens.

I want to access the site on comupter_1 from computer_2.

In your httpd.conf make sure you have:

Listen *:80

And if you are using VirtualHosts then set them as given below:

NameVirtualHost *
<VirtualHost *>
   ...
</VirtualHost>

Can we run local server over local network without internet access , The (probable) reason you cannot access the server through your laptop is because of DNS not resolving. It is trying to connect to server via an external IP ( the  You'll need to do what's called a port redirect of port 80 to the internal LAN IP address of the server that's running the Apache server. Be aware that doing this will cut you off from accessing your router's web interface. The other option is to use an alternative port, perhaps 8080.

Open httpd.conf of Apache server (backup first) Look for the the following : Listen

Change the line to

Listen *:80

Still in httpd.conf, look for the following (or similar):

<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Allow from all
    Deny from all
</Directory>

Change this block to :

<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Allow from all
    #Deny from all
</Directory>

Save httpd.conf and restart apache

Open port 80 of the server such that everyone can access your server.

Open Control Panel >> System and Security >> Windows Firewall then click on "Advance Setting" and then select "Inbound Rules" from the left panel and then click on "Add Rule…". Select "PORT" as an option from the list and then in the next screen select "TCP" protocol and enter port number "80" under "Specific local port" then click on the "Next" button and select "Allow the Connection" and then give the general name and description to this port and click Done.

Restart WAMP and access your machine in LAN or WAN.

Accessing Websites on a Local Network (LAN) Web Server , Accessing Websites on a Local Network (LAN) Web Server websites can be viewed from other computers (running Windows, Mac OS X, Connect directly to the server via its LAN IP address, using that IP in the URL: to any website, the first Apache Virtual Host (DefaultWebsite, localhost) gets returned. You seem no stranger to google and if you want to set up an internal DNS server, there are many guides to that on the internet. Once internal name resolution gives you the internal IP address, browsing to the web server will give the same reply as if you we're a client coming from the outside. 2 - external access to the web server.

* Don't change anything to Listen : keep it as it is..

1) Open httpd.conf of Apache server (backup first) Look for the the following :

<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Allow from all
    #Deny from all
</Directory>

and also this

<Directory "cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

2) Now From taskbar :

Click on wamp icon > Apache > Apache modules > apache_rewrite (enable this module)

And Ya Also Activate "Put Online" From same taskbar icon

You need to allow port request from windows firewall setting.

(Windows 7)

Go to control panel > windows firewall > advance setting (on left sidebar)

then

Right click on inbound rules -> add new rule -> port -> TCP (Specific port 80 - if your localhost wok on this port) -> Allow the connections -> Give a profile name -> ok

Now Restart all the services of Apache server & you are done..

Connect to localhost apache from another device in the same lan , Connect to localhost apache from another device in the same lan. copy localhost Free Duration: 3:36 Posted: Mar 4, 2016 Apache on localhost with no internet connection - not starting I'm trying to run Apache on a laptop. It's setup to listen on localhost:80, but it will not start unless there is an active internet connecection.

if you did change the httpd.conf file located under conf_files folder, don't use windows notepad, you need a unix text editor, try TED pad, after making any changes to your httpd.conf file save it. ps: if you use a dos/windows editor you will end up with an "Error in Apache file changed" message. so do be careful.... Salam

Unable to access Apache webserver from local home network, If the server is connected to local network by wire, the block to use will be If your web page shown up correctly, process to next step. Start a browser on the other device, then enter the IP address you found in to reject any "incoming connection" to any private LAN IP address, no matter of traffic's origin. Accessing Websites on a Local Network (LAN) Web Server There are a number of different ways that local websites can be viewed from other computers (running Windows, Mac OS X, Linux) and mobile devices (iPads, iPhones, Android phones, etc), that are all connected within the same LAN (local network).

nothing to be done for running your wamp sites to another computer. 1. first turn off the firewall. 2. Set Put Online in wamp by clcking in wamp icon at near to clock.

Finally run your browser in another computer and type http:\ip address or computer name e.g. http:\192.168.1.100

Allowing access to an Apache virtual host from the local network only, I have a web page on a Linux server I administer, running Apache 2.2. This server is visible to the outside world for some other services. I would like to configure  Save httpd.conf and restart apache. Open port 80 of the server such that everyone can access your server. Open Control Panel >> System and Security >> Windows Firewall then click on “Advance Setting” and then select “Inbound Rules” from the left panel and then click on “Add Rule…”.

Why can't my local network access the internet site hosted by a , A server on my local network is running Apache2 that hosts a site PC on your LAN does a DNS lookup for your website and gets your request on its internal interface and since it has no port forwarding capability It sounds as though the apache web server is not listning for connections on your internal  If you want, for example, to allow access to a web server on your internal network (say, to allow a client to test) you have to go out of your way to enable that. Application-level firewalling adds an awareness of higher-level protocols (such as HTTP, SMTP, etc.) and inspects for specific exploit patterns.

Is it possible to access server without internet?, How can I access my local web server over the Internet? Connect to localhost apache from another device in the same lan. copy these lines to Directory Options FollowSymLinks AllowOverride None Order deny,allow Allow from all.

Access localhost from the internet, your WAN IP address (whatismyipcom). There are couple of good free service that let you do the same. The next step is to open port (8081) of the server such that everyone can access your server. This depends on which OS you are using. This depends on which OS you are using. Like if you are using Windows Vista, then follow the below steps.

Comments
  • What port is easyphp running on? Is there a firewall on the server?
  • port 80. Firewall is off.
  • As you commented that one of the posters below sufficiently solved the issue - please mark that answer as the accepted one.
  • Thanks a lot. This helped. I got it running. :)
  • @duckyflip.. I did not find httpd.conf in my configuration. Can you please tell me where can I find this file. I am having the same issue..
  • @s_k_t watch out for a ports.conf in newer apache 2.4
  • Please where to find the virtual host after installation ? I checked through easyphp folder but could not see it.
  • @s_k_t - try looking for apache2.conf instead
  • Suggest improvement to not to disable firewall completely as it is huge security risk.
  • and how will I do that ?
  • Thats determined by the "Listen" setting (see above). Listen 127.0.0.l:80 -> only localhost Listen *:80 -> all network interfaces
  • reformulated the question