How to wait for a value with timeout

java wait(timeout)
cypress-wait until
c# wait timeout
testcafe wait for element to appear
java wait timeout or notify
java wait timeout exception
testcafe selector timeout
cy.wait timeout

I have a client/server program written in C++. I want to check the client response (an attribute of a C++ object) through a command send by the server, with a timeout if no response.

I am waiting for an expected value during some seconds. If the expected value is not observed, I need to return with a timeout. I was thinking about a thread and a poll to check the expected value in an specific time interval.

I wonder if C++11/14 features - std::promise, std::future, std::condition_variable or something else - can do it more easily for this case. The inconvenient i see about it is that i have to notice each changing value with a notify.

Well, i need some advice.

None of the C++ language features you mentioned can help in your scenario, because they are intended for interaction within a single running program - which may be multi-threaded, but not separated into two completely independent processes.

However, the networking library you are using (on the server side) might possibly have convenience facilities for doing this.

I realize this is a general and somewhat vague answer, but your question was also not very specific.

Task.Wait Method (System.Threading.Tasks), The Wait method is then called to wait for the task's completion and is provided both a brief timeout value and a cancellation token. C# Copy. using System; using� Lowering the value is pretty trivial without a mysql restart. Let's say you want to lower timeouts to 30 seconds. First, add this to my.cnf [mysqld] interactive_timeout=30 wait_timeout=30 Then, you can do something like this. mysql -uroot -ppassword -e"SET GLOBAL wait_timeout=30; SET GLOBAL interactive_timeout=30"

How to wait for a value with timeout

Within a process, one would typically use a condition variable.

I want to check the client response ... through a command send by the server

There is no standard way to communicate between processes in C++ (unless you count interaction with filesystem). As such, there is also no standard way to enforce a timeout on such communication.

Before you can know how to implement the timeout, you must figure out how you are going to communicate between the client and the server. That choice will be affected by what system you are targeting, so you should first figure that out.

Wait-Job (Microsoft.PowerShell.Core), It uses the Timeout parameter with a value of 30 to establish the maximum wait time, and then stores the results of the command in the $done variable. When the wait_timeout system variable is set dynamically at runtime, its value will be reset the next time the server restarts. To make the value persist on restart, set it in a configuration file too.

If you are on a Linux environment you can try rpcgen and play with .x flies but you’ll have to study it a bit. Not sure for Windows env. Also you can use Dbus which is more intuitive. [edit] Dbus or probably libdbus for you is an IPC cross platform toolkit or library that can fit your need. RPCGEN is an old tool that does the same thing but more complicated. I don’t have a snippet, I apologize but you can search for "qt dbus example".

Java.lang.Object.wait(long timeout) Method, timeout − the maximum time to wait in milliseconds. Return Value. This method does not return a value. Exception. IllegalArgumentException − if the value of� I have a client/server program written in C++. I want to check the client response (an attribute of a C++ object) through a command send by the server, with a timeout if no response. I am waiting for an expected value during some seconds. If the expected value is not observed, I need to return with a timeout.

About the first requirement, server waits for a response with a timeout. Have you tried select() or poll(). They can help us to monitor the socket connection between server and client in a period. Or we can use signal() and alarm(), to check the response after a few seconds. In Bekerley API, combine setsockopt() with SO_RCVTIMEO, SO_SNDTIMEO can also set the timeout for the request. I'm not sure about the library you are implementing, but I hope it has any similar functions.

The second requirement, you are waiting for expected value for a duration. I think condition variable is a good solution for this.

cypress-wait-until, A waiting plugin for Cypress. wait until a global variable has an expected value . cy. timeout: 2000, // waits up to 2000 ms, default to 5000. The following example calls the Wait(Int32, CancellationToken) method to provide both a timeout value and a cancellation token that can end the wait for a task's completion. A new thread is started and executes the CancelToken method, which pauses and then calls the CancellationTokenSource.Cancel method to cancel the cancellation tokens.

Why not using boost::thread with a timed_join?

   boost::thread server_thread(::server_checker_method, arg1, arg2, arg3);
   if (server_thread.timed_join(boost::posix_time::milliseconds(1000))) // wait for 1s
   {
      // Expected value found in the server in less than 1s
   }
   else
   {
      // Checking expected value took more than 1s, timeout !!!
   }

You can put your checking mechanism in the server_checker_method and return if the expected values are OK. Otherwise, iterate over the loop until the timeout reaches.

Built-In Wait Mechanisms, TestCafe has a built-in automatic waiting mechanism and does not require the actual value until it matches the expected value or the assertion timeout passes. The value -1 causes the computer to wait indefinitely for a keystroke (like the PAUSE command) /nobreak Ignore user key strokes. (Windows 7 or greater) Timeout will pause command execution for a number of seconds, after which it continues without requiring a user keystroke.

threading - Wait until an event is set or until a timeout, Python code example 'Wait until an event is set or until a timeout' for the package threading, powered by Kite. To set an infinite timeout, set the property value to InfiniteTimeSpan. A Domain Name System (DNS) query may take up to 15 seconds to return or time out. If your request contains a host name that requires resolution and you set Timeout to a value less than 15 seconds, it may take 15 seconds or more before a WebException is thrown to indicate a

Timeouts, Dealing with timeouts Setting correct timeout values can mean the difference to use as the associated promise has to be initialized before waiting for it. I can use Task.ContinueWith to asynchronously wait for the task to complete (i.e. schedule an action to be executed when the task is complete), but that doesn't allow to specify a timeout. I can use Task.Wait to synchronously wait for the task to complete with a timeout, but that blocks my thread. How can I asynchronously wait for the task to

Cooperative asynchronous JavaScript: Timeouts and intervals , If you specify a value of 0 (or simply omit the value), the function will run as In the following example, the browser will wait two seconds before� If we need to change the wait_timeout global value we should follow below steps. 1. Open the my.cnf file which resides in /etc/mysql directory. 2. Add below value with the mysqld blog to my.cnf file.

Comments
  • What networking library are you using? That should already have this functionality built in, without the need to do this manually.
  • Show your code, please.
  • For example, i have to check the number of exchanged messages through a request (a simple int member in my test server) or a value in the client response. The test has to validate the response (corrected value) or not (wrong value or timeout). I think a personal polling was a bit heavy compare to the simplificity i found in these features.
  • @YopAndMail: Communications among different programs, possibly on different machines, will necessarily be more complex using a programming language not intended to write multiple independent programs at once. Note, though, that in many cases you don't have to repeatedly-poll, but go to sleep until a message is available from the client or some time passes.
  • In fact, just talking to all of you makes me take a step back. I think i searched too much complexity (my problems mixes architecture and implementation in my head). The timeout will be, obviously, implemented by my test server and my caller tests, will (in)validate the response the server gets. Well, it is so simple as I'm a little ashamed now..
  • @YopAndMail: There is nothing to be ashamed about. You asked a legitimate - though somewhat inspecific - question and got an answer. Everything's ok.
  • Please provide a little more information than just name-dropping... what is rpcgen? What are .x files? What is D-Bus? Maybe some of us know the answer, but not all of us. You can also add links to further information.
  • Dbus or probably libdbus for you is an IPC cross platform toolkit or library that can fit your need. RPCGEN is an old tool that does the same thing but more complicated. I don’t have a snippet, I apologise but you can search for "qt dbus example"
  • I meant, put that in the answer please... :-P