Factory reset Android x86

adb wipe data/factory reset command
adb factory reset

I have installed the Android x86 in VirtualBox, but how to perform a factory reset?

Go to the homescreen, press the menu button then navigate through:

Settings->Privacy->Factory data reset

android x86 reset factory every boot, i did installed android x86 9.0 rc1 on my 16GB SD card it had too many bugs and crashes (Cannot take screenshots , VirtWifi problems and . Get ready to factory reset Step 1: Know the Google Account username & password on your phone Step 2: Back up your data to your Google Account Step 3: Plug in & connect

Boot in debug mode. in first console enter exit command. (now the data partition will be mounted) Then you will get another console with higher resultion. run this commands:

cd data
rm -R *

and you have wiped data partition including internal storage.

Installation Howto, progress bar. If you see the following screen, the installation is complete. Congratulations! Now you can run Andrond-x86 directly, or you can reboot and run it:  FRP (Factory Reset Protection) is a security feature of Android phones and tablets that prevents others from hard resetting your device and using it after the hard reset. The restriction appears on the screen after factory reset with the caption “Google Account Verification” and request for the Google account password before setup can begin.

How about booting your "device" into recovery mode, where you can wipe data? I assume that the following commands can be used:

adb shell reboot recovery

Also see this.

[Q] Wipe Data Factory Reset directly from de…, but I can not mount the SD. Code: adb shell recovery --wipe_data * daemon not running. starting it now on port 5038 * adb devices adb reboot  1.Reset Android to factory settings Using Mobile settings Head on to settings in your Android Menu from Menu or Shortcut. Search for “Backup and reset” or “Factory Reset” option in settings (In some Mobiles Settings -> Additional Settings->Backup and Reset). Click on Backup and reset and then Factory Reset.Make a backup of your data.

Android x86 Installation and Troubleshooting Procedures, /system partition. Reboot your computer, and enjoy your fresh Android x86 installation. How to boot Android x86 on Unsupported Graphics. On Google Pixels and some other stock Android devices you can find the factory reset option this way: Go to Settings and scroll all the way down to find System. Tap on System and find the Reset

How to boot the Android-x86 Live-CD when you have problems with , How to boot the Android-x86 Live-CD when you have problems with your graphiccard. From ikem.krueger@googlemail.com. When you start  Using Hardware Keys to realize Android factory reset: Turn off the Android phone Boot the Android phone into Recovery Mode by pressing and holding down the ‘Power, Volume Up, and Home buttons’ Navigate and tap on Wipe data/factory reset by using the volume keys

Get Source - Android-x86 - Porting Android to x86, This page has (hopefully) the latest information about how to build Android for x86 platforms like Eee PC. The built images  Samsung also outlines an alternative factory reset technique you can try in its online help:. Switch off the device. Press and hold the Volume up button, the Power button and the Home button at

  • What is MAKE and Model Version of your device?
  • It depends what version of android it is, but it'll be in the settings somewhere.
  • @ChintanRaghwani, I am using android-x86-2.3-RC1-eeepc.iso
  • When it reboot, it enter the grub and boot as normal, nothing happended.
  • That's because Android x86 doesn't ship with a recovery partition to reboot into.
  • This worked essentially the way I wanted, which was to wipe data like the recovery menu.
  • The grub prevent from booting into recovery mode
  • How can it prevent it? Are you not able to edit the options used for booting?
  • I can edit the grud menu, but how to make it boot into recovery mode?
  • That is (IMHO) a question you should ask the people who made android-x86. I see they have an IRC channel..