Enable and Disable IPv4 and IPv6 of an adapter programmatically in C#

Enable and Disable IPv4 and IPv6 of an adapter programmatically in C#

disable-netadapterpowermanagement all adapters
win32_networkadapter ip address
powershell get network adapter settings
how to enable ipv6 windows 7
ipv6 enable or disable router
how to enable ipv6 windows 10
ipv6 enable or disable reddit
how to disable ipv6

Is it possible to Enable/Disable the IPv4 and IPv6 protocols for a selected network adapter using C# and .Net libraries or the registry?


I have tried the example How to disable IPv6 programmatically , but it doesn't work on my PC.

However, I found another way to solve the problem without editing the registry directly.

First, I will show you how to solve this problem using PowerShell.

We have many ways to get the name of NIC, for example execute the following command on PowerShell:

Get-NetAdapter

Let's assume the NIC name is "Ethernet".

To enable IPv6, execute the following command on PowerShell:

enable-NetAdapterBinding -Name 'Ethernet' -ComponentID ms_tcpip6

To disable IPv6, execute the following command on PowerShell:

disable-NetAdapterBinding -Name 'Ethernet' -ComponentID ms_tcpip6

To get all ComponentIDs of the NIC, execute the following command on PowerShell:

Get-NetAdapterBinding -name 'Ethernet'

Now, I will show you how to do this using C#.

1.Install the nuget package which named "Microsoft.PowerShell.5.ReferenceAssemblies" to your project

2.If you want to disable IPv6, use the following code

using (var powerShell = PowerShell.Create())
{
    powerShell.AddScript("Disable-NetAdapterBinding -Name 'Ethernet' -ComponentID ms_tcpip6");
    powerShell.Invoke();
    if (powerShell.HadErrors)
    {
        // Failed, do something
        return;
    }
    // Success, do something
    return;
}

3.Now, I believe that you have already know how to perform other similar operations.

Enable and Disable IPv4 and IPv6 of an adapter programmatically in , Enable and Disable IPv4 and IPv6 of an adapter programmatically in C#. Is it possible to Enable/Disable the IPv4 and IPv6 protocols for a selected network  I am trying to write a program using C# to act as a multipurpose tool for my company. One of the things we would like in this tool is to determine if IPv6 is enabled/binded to the local area connection network adapter on our Windows 7 machines. I'm not looking for it to have an address, just to know if it enabled or disabled on that adapter.


Take a look at : http://eniackb.blogspot.com/2009/07/how-to-disable-ipv6-in-windows-2008.html

Basically modify registry to do same as you would using GUI.

Win32_NetworkAdapterConfiguration class, Represents the attributes and behaviors of a network adapter. This class includes DisableIPSec, Disables IPsec on this TCP/IP-enabled network adapter. EnableDHCP For more information, see IPv6 and IPv4 Support in WMI. Example IPv6 Note that this C# sample uses the Microsoft.Management. Next, right click on the network adapter you are looking to change and then select Properties. Now, uncheck the box for Internet Protocol Version (TCP/IPv6) and then click OK . Once that is


You need to use INetCfgBindingPath::Enable then INetCfg::Apply method (see here). Please look into code example for details: how to disable ipv6 programmatically.

As far as I know nvspbind can disable or enable IPv6 on specified adapter without rebooting PC. And I think nvspbind is based on INetCfg API.

Disable-NetAdapterPowerManagement, The Disable-NetAdapterPowerManagement cmdlet disables specific power This feature enables power saving on the computer by reducing the number of receive connection for IPv4 and IPv6 including TCP SYN IPv4 and TCP SYN IPv6. Is it possible to disable/enable ipv4/ipv6 functionality programmatically on linux? By disabling ipv4 I mean that the system should not respond to or initiate any ipv4 traffic. And enabling ipv4 will have the system respond to ipv4 traffic.


Enabling and Disabling IPv6 on PCs, All key components of the University network infrastructure support both IPv4 and IPv6 traffic These instructions explain how to enable and disable IPv6 on PCs  By default, the 6to4 tunneling protocol is enabled in Windows Vista, Windows Server 2008 or later versions when an interface is assigned a public IPv4 address (that is, an IPv4 address that is not in the ranges 10.0.0.0/8, 172.16.0.0/12, or 192.168.0.0/16). 6to4 automatically assigns an IPv6 address to the 6to4 tunneling interface for each such


Enable ipv6, So, if IPv6 was disabled on the system intentionally, it can be re-enabled by the Enable and Disable IPv4 and IPv6 of an adapter programmatically in C#. Enable and Disable IPv4 and IPv6 of an adapter programmatically in C#. Ask Question Is it possible to Enable/Disable the IPv4 and IPv6 protocols for a selected


Win32 network adapter configuration, As a result, DHCP for this network adapter is disabled. like this in Powershell, or programmatically using . exe / name Microsoft. The EnableStatic WMI class method enables static TCP/IP addressing for the target network adapter. their speed, the IPv4 and IPv6 addresses, the DNS and the MAC address are available,  If you already know the name of the network adapter for which you want to disable IPv6, then you can proceed to next step directly. Get-NetAdapter This will show list of network adapters in the local computer. Let us say I want to check if IPv6 is enabled on network named LocalNetwork and then disable it.