Script to change ip address on windows

script to change ipv4 settings
batch file to change ip address and dns windows 10
how to change static ip address in command prompt
netsh interface ip set address
how to change ip address in windows 10 using cmd
change ip address remotely with netsh
change ip address windows server 2008 command line
netsh set default gateway

I use my computer to communicate with a piece of hardware via ethernet. To communicate with this device I set my ip to 192 168 0 11, subnet mask to 255 255 255 0, and default gateway to 192 168 0 1 for IPv4. To use the internet, I choose "Obtain an IP address automatically" via control panel.

I'd like to have a script that allows my to quickly choose one or the other ethernet setting - hardware or internet.

I program mostly in python but maybe there is a batch file solution.

Thanks,

Barry.


You can use the Python WMI module to do this (install the PyWin32 extensions and the WMI module before running these scripts). Here is how to configure things to talk to the hardware device:

import wmi

# Obtain network adaptors configurations
nic_configs = wmi.WMI().Win32_NetworkAdapterConfiguration(IPEnabled=True)

# First network adaptor
nic = nic_configs[0]

# IP address, subnetmask and gateway values should be unicode objects
ip = u'192.168.0.11'
subnetmask = u'255.255.255.0'
gateway = u'192.168.0.1'

# Set IP address, subnetmask and default gateway
# Note: EnableStatic() and SetGateways() methods require *lists* of values to be passed
nic.EnableStatic(IPAddress=[ip],SubnetMask=[subnetmask])
nic.SetGateways(DefaultIPGateway=[gateway])

Here is how to revert to obtaining an IP address automatically (via DHCP):

import wmi

# Obtain network adaptors configurations
nic_configs = wmi.WMI().Win32_NetworkAdapterConfiguration(IPEnabled=True)

# First network adaptor
nic = nic_configs[0]

# Enable DHCP
nic.EnableDHCP()

Note: in a production script you should check the values returned by EnableStatic(), SetGateways() and EnableDHCP(). ('0' means success, '1' means reboot required and other values are described on the MSDN pages linked to by the method names. Note: for EnableStatic() and SetGateways(), the error codes are returned as lists).

Full information on all the functionality of the Win32NetworkAdapterConfiguration class can also be found on MSDN.

Note: I tested this with Python 2.7, but as PyWIn32 and WMI modules are available for Python 3, I believe you should be able to get this working for Python 3 by removing the "u" from before the string literals.

Batch File Script to change IP addresses, This batch file script will allow you to set a static or dhcp ip address on a spicific I created this script because I have to change the IP address on my laptop for For Windows XP SP3 and above I use the netsh command. Learn Ip Changer With VPN Service. Start Using VPN Now! The Best How To Change IP Guide. Secured VPN Services to Use.


You can use the subprocess module to start

netsh interface ip set address [params]

Start this from the commandline (without[params]) to get some help how to use it. Then you can do

import subprocess
subprocess.call("netsh interface ip set address ....".split())

Update:

For those who's too busy to rtfm,

netsh interface ip set address lan static 192.168.0.100 255.255.255.0
netsh interface ip set address lan dhcp

here lan is the name of the network interface to configure, 192.168.0.100 is ip address, 255.255.255.0 is network mask. The first command sets static address, the second reverts to dhcp.

How to Change Your Computer's IP Address From the Command , The netsh command allows you to configure just about any aspect of your network connections in Windows. To work with it, you'll need to open  and to set the * Obtain an IP address automatically setting: netsh interface ip set address "Local Area Connection" dhcp More info: read this Configure TCP/IP from the Command Prompt and How to change IP address from command prompt. This is assuming 3 things. 1) The network adapter you're trying to change the IP for is "local area connection".


You can use vbscript to change IP Address,

Dim strIPAddress, strSubnetMask,strGateway, intGatewayMetric, strDns1, strDns2, objWMIService, colItems, stradaptername, objFSO
Const ForReading = 1 
Const ForAppending = 8
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set OutPutFile = objFSO.CreateTextFile("C:\ProgramData\test.txt" ,2 , True)
Set InterfaceName = objWMIService.ExecQuery ("Select * From Win32_NetworkAdapter Where NetConnectionStatus >= 0")
If objFSO.FileExists("C:\ProgramData\test.txt") Then
Set OutPutFile = objFSO.CreateTextFile("C:\ProgramData\test1.txt" ,2 , True)
End If
For Each objItem in InterfaceName
If objFSO.FileExists("C:\ProgramData\test.txt") Then
arrInterfaces = objItem.NetConnectionID
'wscript.echo "test: " &arrInterfaces
Set objFileToWrite = CreateObject("Scripting.FileSystemObject").OpenTextFile("C:\ProgramData\test.txt",8,true)
ObjFileToWrite.WriteLine(arrInterfaces)
objFileToWrite.Close
Set objFileToWrite = Nothing
End If
next
If objFSO.FileExists("C:\ProgramData\test.txt") Then
Set objFileToRead = CreateObject("Scripting.FileSystemObject").OpenTextFile("C:\ProgramData\test.txt",1)
strFileText = objFileToRead.ReadAll()
objFileToRead.Close
Set objFileToRead = Nothing
'wscript.echo "obtained" &strFileText
End If
Result = inputbox("Enter the AdapterName: " &vbCrLf &strFileText)
If Result = "" then
'wscript.echo "user selected cancel"
Else
strIPAddress=InputBox("Enter Static IP Adrress: ")
strSubnetMask =InputBox("Enter SubnetMask: " )
strGateway=InputBox("Enter Default Gateway: ")
strDns1=InputBox("Enter Preferred DNS: ")
strDns2=InputBox("Enter Alternate DNS: ")
Set objShell = WScript.CreateObject("Wscript.Shell")
objShell.CurrentDirectory = "C:\Windows\System32"
objShell.Run "netsh interface ip set address name=""" & Result & """ static " & strIPAddress & " " & strSubnetMask & " " & strGateway & " " & intGatewayMetric, 0, True
objShell.Run "netsh interface ip set dns name=" & Result & " static "& strDns1, 0, True
objShell.Run "netsh interface ip add dns name=" & Result & " addr="& strDns2, 0, True
Set objShell = Nothing: Set obj=Nothing
End If
WScript.Quit

How to Change IP Address Easily Using Batch File Script, Using Batch File Script, to change IP addresses on windows, it is the same process, to change Duration: 5:42 Posted: Sep 9, 2015 Change Your IP Address, Subnet Mask, and Default Gateway With the interface name in hand, you’re ready to change the IP Address, subnet mask, and gateway. To do this, you’ll issue a command using the following syntax: netsh interface ipv4 set address name="YOUR INTERFACE NAME" static IP_ADDRESS SUBNET_MASK GATEWAY


Script to change ip address on windows, You can use the Python WMI module to do this (install the PyWin32 extensions and the WMI module before running these scripts). Here is how  How to script a change to a static IP address or DHCP IP address in Windows using a batch file More and more I find myself needing to temporarily set static IPs on my laptop to access equipment for configuration or management, and changing IP addressing in Windows is easy enough, but I often either forget the settings I need or need to switch


How to Batch File Script to change IP addresses, This batch file script will allow you to set a static or dhcp ip address on a spicific adapter on your pc. I created this script because I have to  How to change IP address using a Batch File: Starting with Windows 2000, Microsoft has provided a powerful utility, Netsh, which lets you display and modify the network configuration of Windows computers. You can use the Netsh on the command line or in a batch file. Here's an example of how you can create a…


Change IP Address and DNS Servers using the Command Prompt, In this guide, we're going to show you how to change your IP address and DNS servers using the Command Prompt in Windows 10. Site Notice. How to Change Your IP Address in Windows Using PowerShell. You may know how to change IP address via GUI. It's pretty easy. Just go to Control panel > network and internet, selecting the IPv4 Properties and change the IP address. This whole process will take around a minute to do so.