Emulator error: This AVD's configuration is missing a kernel file

emulator: emulator: error: android_sdk_root is undefined android studio
android studio emulator not working
run android emulator without android studio windows
android emulator not working
emulator error no avd specified use '@foo or avd foo' to launch a virtual device named 'foo
what is avd
android studio emulator not working windows 7
avd manager download

This problem was discovered when I tried to run the Android emulator in Eclipse. Can't figure out what happened. I searched online for the solution, but it seemed to be vague and I don't understand clearly. I was following the steps to install the AVD according to the sites and I can't figure out what I missed. Please explain it to me in steps to follow.

Start the emulator from the command line, /Users/janedoe/Library/Android/sdk/emulator/emulator -avd For example, the following command enables error messages from all  See a tutorial for the Intel emulator here: HAXM Speeds Up the Android Emulator. Roman Nurik posts here that the Intel emulator with Android 4.3 is “blazing fast”. Alternative 2 In the comments of the post above you can find a reference to Genymotion which claims to be the “fastest Android emulator for app testing and presentation

Another reason you can get this error is that Eclipse can't find the correct file.

Check out where Eclipse is looking for your SDK files. You can do this on the command line. Below is an example for the windows command prompt for an avd I created and named 'SonyTabletS':

c:\Program Files (x86)\Android\android-sdk\tools> emulator @SonyTabletS -verbose

The first line returned shows where eclipse is looking for the SDK files and will look something like:

emulator: found ANDROID_SDK_ROOT: C:\Program Files (x86)\Android\android-sdk

Make sure that location is correct.

In my case, ANDROID_SDK_ROOT was initially set incorrectly to my home directory. This is because I set it that way by blindly following the Sony Tablet S SDK install instructions and adding an ANDROID_SDK_ROOT environment variable with the incorrect path.

Configure hardware acceleration for the Android Emulator, emulator -avd avd_name -gpu mode [{- option [ value ]} . However, if your graphics drivers have issues rendering OpenGL, you might need to  For android emulator there are alternatives like geanny motion. Since you have AVD installed you could try running from the command line. run flutter devices to get the list of emulators and their id. then run (assuming emulator-5554 is you emulator id) flutter run -v -d emulator-5554

My story, Eclipse wanted a file called "kernel-ranchu" in the system image folder ( /path/to/android-sdk-macosx/system-images/android-25/google_apis/arm64-v8a ).

emulator: ERROR: This AVD's configuration is missing a kernel file! Please ensure the file "kernel-ranchu" is in the same location as your system image.

emulator: ERROR: ANDROID_SDK_ROOT is undefined

In that system image folder there was a file called "kernel-qemu". I just renamed it as "kernel-ranchu" and it worked...

android Emulator error: This AVD's configuration is missing a kernel , android Emulator error: This AVD's configuration is missing a kernel file? Make sure that you also have configured properly an emulated device. Android Studio may come with one that shows up in the list of emulated devices but that is not set to work with the SDK version you are using. Open SDK Manager and download Intel x86 Emulator Accelerator (HAXM installer) if you haven't. Now go to your SDK directory (C:\users\username\AppData\Local\Android\sdk, generally). In this directory, go to extras → Intel → Hardware_Accelerated_Execution_Manager and run the file named " intelhaxm-android.exe ".

I had the same problem. In my case it turned out I had installed another version of the sdk alongside the version provided by Android Studio. Changing my ANDROID_SDK_ROOT environment variable to the original value fixed it for me.

Android emulator is not booting after it is created and started by AVD , After creating emulator using AVD manager step. Step and Tool Issues Failed to check emulator boot status, error: * daemon not running; starting now at tcp:  open - emulator error no avd specified use '@ foo or '- avd foo to launch a virtual device named foo Android tools r17 x86 emulator-why can't I create an x86 AVD? (2) At the time of this writing, the only available x86 emulator image is for Android 2.3.3 (API Level 10), listed in the SDK Manager as "Intel Atom x86 System Image".

Here's my story. Under 'Actions' on the AVD manager, I viewed the details for the AVD which wasn't working. Scrolling down, I found the line:

image.sysdir.1: add-ons\addon-google_apis-google-16\images\armeabi-v7a\

I then navigated to this file at:

C:\Users\XXXX\AppData\Local\Android\sdk\add-ons\addon-google_apis-google-16\images\armeabi-v7a

I found there was no kernel file. However, I did find a kernel file at:

C:\Users\XXXX\AppData\Local\Android\sdk\system-images\android-16\default\armeabi-v7a

So I copied it and pasted back into:

C:\Users\XXXX\AppData\Local\Android\sdk\add-ons\addon-google_apis-google-16\images\armeabi-v7a

The AVD then worked.

Emulator -avd does not launch the virtual device, I'm pretty sure you can solve this by calling the emulator from the directory where it is installed: e.g. $ cd /home/amir/Android/Sdk/tools/  If you see an error about a failure to install the APK on the emulator or a failure to run the Android Debug Bridge (adb), verify that the Android SDK can connect to your emulator. To verify emulator connectivity, use the following steps: Launch the emulator from the Android Device Manager (select your virtual device and click Start).

This AVD's configuration is missing a kernel file! - GitLab CI, android-wait-for-emulator emulator: ERROR: This AVD's configuration is missing a kernel file!! emulator: ERROR: ANDROID_SDK_ROOT is  Launch the Android Emulator without first running an app. To start the emulator: Open the AVD Manager. Double-click an AVD, or click Run. The Android Emulator loads. While the emulator is running, you can run Android Studio projects and choose the emulator as the target device.

Managing AVDs from the Command Line, If you want to use the default hardware emulation options for the AVD, just To fix this error, use the android update avd command to recompute the path to the  The First time using the AVD manager of Android can be a headache for some Windows users, when they try to setup an emulator with a x86 Android* image for any target API level. To prevent this error, we need to ensure that we have Intel® HAXM for Android installed on our machine.

How to fix Android Studio emulator is not working !!! 100% Fix , Android Studio AVD - Emulator: Process finished with exit code 1 If this didn't Fix it Follow Duration: 2:03 Posted: Sep 3, 2018 For information about using the Android Emulator UI, see Run Apps on the Android Emulator. Starting the emulator Use the emulator command to start the emulator, as an alternative to running your project or starting it through the AVD Manager .

Comments
  • same problem: stackoverflow.com/questions/8190820/scala-android-newbie - create a new AVD
  • On a mac still could not start it; using a repair on the AVD worked for me stackoverflow.com/a/15971119/664220
  • restarting Eclipse after installing the ARM image and then creating a new AVD worked for me.
  • May be this link may help: developer.android.com/tools/help/avd-manager.html
  • Unfortunately crashing on certain ATI cards when GPU emulation is turned on - looking forward to an updated emulator.
  • I found that I had to delete the emulator and recreate it after installing to solve this problem.
  • @you786 yes it is important to recreate it
  • I have done all possible way but its still there while launching simulator
  • See my answer below.
  • In my case, Android\android-studio\sdk has been taken over ANDROID_SDK_ROOT location while I'm running emulator from Android\android-sdk folder. Once it correctly points to Android\android-sdk, it works.
  • This was it for me. My build environment uses one ANDROID_SDK_ROOT that I can't easily update. The fix was to launch a clean command prompt and set ANDROID_SDK_ROOT to the right one and launch the sdk manager from there.
  • Double check that you don't accidentally have two copies of the SDK installed. If you're like me, you were installing the "ARM EABI v7a System Image" in one copy but the AVD was trying to find it in the other copy. I removed one of my copies of the SDK and then my emulator started right up.