Why the following code is pulling only the ID name of first image?

docker pull from private registry
docker pull latest image
use the match() function to determine the index of the individual with the minimum height.
docker pull and run
pull image
docker pull base image
docker force pull
docker pull true

I have 4 images with below 4 id names:

"ObiWan", "Luke", "Sidious", "Maul";

All of them have 1 class name: "images".

But with the below code, no matter which image I press, it only shows "ObiWan" as ID for all 4 of those images in the Console Log.

select = $(".image").one("click", function() {


console.log(select.attr('id'));

if (select.attr("id")==="ObiWan"){
    $("#player").append($("#ObiWan"));
    $("#enemies").append($("#Luke"));
    $("#enemies").append($("#Sidious"));
    $("#enemies").append($("#Maul"));
} else if (select.attr("id")==="Luke"){
    $("#player").append($("#Luke"));
    $("#enemies").append($("#ObiWan"));
    $("#enemies").append($("#Sidious"));
    $("#enemies").append($("#Maul"));
} else if (select.attr("id")==="Sidious"){
    $("#player").append($("#Sidious"));
    $("#enemies").append($("#ObiWan"));
    $("#enemies").append($("#Luke"));
    $("#enemies").append($("#Maul"));
} else if (select.attr("id")==="Maul"){
    $("#player").append($("#Maul"));
    $("#enemies").append($("#ObiWan"));
    $("#enemies").append($("#Luke"));
    $("#enemies").append($("#Sidious"));
}

});
// person array
var person = ["ObiWan", "Luke", "Sidious", "Maul"];

// this is event delegate, if your new img.image attach click event handler.
$(document).on("click", ".image", function($e) {
  var id = $($e.currentTarget).attr("id");
  console.log(id);

  // #player
  $("#player").append($("#"+id));
  person.forEach(function(person) {
    if(id === person) { // #player -> not enemy...!
      return;
    }
    // #enemies
    $("#enemies").append($("#"+person));
  });
});

Why the following code is pulling only the ID name of first image?, // person array var person = ["ObiWan", "Luke", "Sidious", "Maul"]; // this is event delegate, if your new img.image attach click event handler. // NOTE that if your page design makes it more efficient to obtain (say) an image id or list of ids (of identical images) *first*, and only then get the image src, // you can pass this id or list data to forceImgReload() along with (or instead of) a src argument: just add an extra or replacement parameter for this information to // this

You should replace select with $(this) like the following:

$(".image").one("click", function (e) {
  var imageID = e.target.id;
  console.log(imageID);
  if (imageID === "ObiWan") {
    $("#player").append($("#ObiWan"));
    $("#enemies").append($("#Luke"));
    $("#enemies").append($("#Sidious"));
    $("#enemies").append($("#Maul"));
  } else if (imageID === "Luke") {
    $("#player").append($("#Luke"));
    $("#enemies").append($("#ObiWan"));
    $("#enemies").append($("#Sidious"));
    $("#enemies").append($("#Maul"));
  } else if (imageID === "Sidious") {
    $("#player").append($("#Sidious"));
    $("#enemies").append($("#ObiWan"));
    $("#enemies").append($("#Luke"));
    $("#enemies").append($("#Maul"));
  } else if (imageID === "Maul") {
    $("#player").append($("#Maul"));
    $("#enemies").append($("#ObiWan"));
    $("#enemies").append($("#Luke"));
    $("#enemies").append($("#Sidious"));
  }
});

Beginning Programming in 24 Hours, Sams Teach Yourself, Retrieving Records from a Database The first thing you often do with a database is retrieve records. with the following syntax: Click here to view code image SELECT columns (or *) FROM tablename; The asterisk (*) means pull every single field from whatever table you Perhaps you only want the ID and company name. The id on the other hand is a unique identifier for browser, client side and JavaScript.Hence form needs an id while its elements need a name . id is more specicifically used in adding attributes to unique elements.In DOM methods,Id is used in Javascript for referencing the specific element you wantyour action to take place on.For example:-

You can pass the events to the function and can get the target element ID

select = $(".image").on("click", function(e) {
    console.log(e.target.id);
    if (e.target.id==="ObiWan"){
        $("#player").append($("#ObiWan"));
        $("#enemies").append($("#Luke"));
        $("#enemies").append($("#Sidious"));
        $("#enemies").append($("#Maul"));
    } else if (e.target.id==="Luke"){
        $("#player").append($("#Luke"));
        $("#enemies").append($("#ObiWan"));
        $("#enemies").append($("#Sidious"));
        $("#enemies").append($("#Maul"));
    } else if (e.target.id==="Sidious"){
        $("#player").append($("#Sidious"));
        $("#enemies").append($("#ObiWan"));
        $("#enemies").append($("#Luke"));
        $("#enemies").append($("#Maul"));
    } else if (e.target.id==="Maul"){
        $("#player").append($("#Maul"));
        $("#enemies").append($("#ObiWan"));
        $("#enemies").append($("#Luke"));
        $("#enemies").append($("#Sidious"));
    }
});

Making Things See: 3D vision with Kinect, Processing, Arduino, and , However, at this point in the calibration process, the fried chicken is not all that In draw, our code that accesses the user's joint positions is surrounded by two if statements. We can only access those positions if we are tracking a user and we have 9 Here, we'll access that ID, pulling the first element out of our IntVector  To make executing the sample commands easier, the tutorials in this series use shell environment variables. Execute the following command to set the ACR_NAME variable. Replace <registry-name> with a unique name for your new container registry. The registry name must be unique within Azure, contain only lower case letters, and contain 5-50

Smashing WordPress: Beyond the Blog, All you have to do is pass the post ID to the [gallery] shortcode, like this: If you were to build an image gallery you'd probably bypass the whole custom code part featured images to represent the gallery instead of just pulling a thumbnail as in In fact, if galleries are the only thing you publish that might even be the better  Define a ResultSet object to hold the results of the getAllEmployees query, and iterate through the rows of the result set, displaying the first four columns, Employee Id, First Name, Last Name, and Email. To do this, add the following code to the main method:

Chapter 2 R basics, To follow along you will therefore need access to R. We also recommend the use of an integrated Copy and paste the code above into your console to define the three variables. Note that These datasets are objects that can be used by simply typing the name. You can do this by using the function save or save.​image . Image Borders. You can add a border to your image by using the CSS border property. You can specify the width, style, and color of the border. For example, border:1px solid black; would create a border that's one pixel wide, solid and black in color.

docker pull, For example uses of this command, refer to the examples section below. Pulling the debian:jessie image therefore only pulls its metadata, but not its layers, because all layers the same image ID because they are actually the same image tagged with different names. To know the digest of an image, pull the image first. the software first checked if this image is available on your computer and since it wasn’t it downloaded the image from Docker Hub. So getting an image from Docker Hub works sort of automatically. If you just want to pull the image but not run it, you can also do. docker pull rocker/verse. Getting an image to Docker Hub.

Comments
  • All of them have class images but you select .image. Is that a problem? Use $(this).attr('id') instead of select.attr()
  • I used .image to call the class named as images. And $(this) does not solve the problem.
  • Please visit meta.stackexchange.com/questions/5234/…
  • if you're going to improve the code, then I'd say also change the unscalable #enemies append. Use an array to output the enemies instead.
  • @A.Lau I agree your opinion.. hahaha.. I'll try it!
  • Thank you @seunggabi . This one works like a charm! :)
  • Thanks for your opinion as well @A.Lau
  • @ShahriarFiroz if this answers your question, remember to click on the tick.
  • And cache the ID too
  • using $(this) returns the same result. It does not solve the problem. $(this) is referring to the same Select object.
  • @ShahriarFiroz Edited
  • @Omid Nikrah, thanks for editing. Yes this also works. The main thing I was missing in my code was, I was not using the event handler methods. Which basically did the deal.