S3 static website index document

s3 static website bucket policy
aws s3 static website limitations
aws s3 static website https
s3 serve static site
static web page s3
the specified bucket does not have a website configuration
s3 website public
static s3 page

I'm trying to upload my static website to my s3 bucket. I've managed to accomplish this. I've created my_bucket and then create a sub_bucket named test_folder and in that I uploaded all my css, html, js files.

It would look like this now:

 my_bucket/
  test_folder
    index.html

And I was able to view my index.html, horray! :D. But my question is in setting up the index document, since the index.html is located to a sub_bucket: test_folder/index.html when I try to save it, gave me The

IndexDocument Suffix is not well formed

Is it possible to link the index.html in a sub_bucket? If yes, how? If not, is there an alternative way to achieve this? I have here a screenshot link

Though often used for different purposes, the index document was originally intended, conceptually, to be the "index" (directory listing or other content summary) of all of the files within each folder, so this configuration parameter specifies the index document to return for each folder in the entire bucket, if such a document exists within the folder... this isn't a single configuration "thing" for the bucket as a whole.

If your attempted configuration had been accepted by S3, it would have had the following impact, assuming a bucket name of "example.com":

browser address bar          file (object) actually returned
---------------------------  ------------------------------------
http://example.com           example.com/test/index.html
http://example.com/help      example.com/help/test/index.html
http://example.com/foo/test  example.com/foo/test/test/index.html

It seems very unlikely that this is what you actually intended.

However, but that is how index documents work... they are conceptually intended to be related to the other things at each level of the directory hierarchy, which of course could be the actual listing of files, or could be an "index" in a much more broad and vague and general sense of any "page," such as a landing page you want a visitor to see when they go to a specific "directory" on your site, which of course, in the modern web is not typically conceptualized as a "directory" but rather simply as a "page."

So the index document has to be immediately under the same / delimiter and can't contain an additional / within its own specification.

The index document for example.com has to be stored in example.com/index.html (assuming "index.html" is your chosen index filename) -- it has to be stored within the "directory" that it indexes, just like on a conventional web server, where, in some configurations, the web server will actually display a directory listing of files, with the "index" page replacing that directory listing in cases where the "index" page actually exists. Of course, S3 doesn't have default directory listing page functionality.

http://docs.aws.amazon.com/AmazonS3/latest/dev/IndexDocumentSupport.html

In contrast to the index document, the error document, if you configure it, is a global configuration that is used regardless of where, within the bucket, the 404 occurs, so slashes are supported in that entry. The AWS console prompts are light on hints as to the nature of the two entries, which are so different in their behavior that they arguably should be more separated, visually.


You'll note that "sub-bucket" isn't an actual term, for what you are describing, which is an object with delimiters in its key (path), which gives the appearance of being nested under a directory or folder.

For clarity, I have used the words "folder" and "directory" very casually all throughout this answer, with the conventional meaning... but for technical accuracy, I'll mention that S3 objects are not really stored internally in a hierarchical fashion "in directories." It appears this way, and for practical purposes, it works that way; however, it's actually the case that the / character, while close to being just another character in the object key, although it gets some special treatment as a delimiter because of its conventional use as a directory delimiter.Unlike some more conventional filesystems, the number of "files in each directory" does not pose any performance concern with S3 and doesn't need to be managed in the same way as is needed in a conventional filesystem when a large number of files exists, since S3 internally hashes the key ("path") of each object for its internal storage partitioning logic.

Configuring a static website - AWS Documentation, Though often used for different purposes, the index document was originally intended, conceptually, to be the "index" (directory listing or other  To host a static website on Amazon S3, you configure an Amazon S3 bucket for website hosting and then upload your website content to the bucket. When you configure a bucket as a static website, you must enable website hosting , set permissions , and create and add an index document .

I also had this issue. Based on Michael's answer, I developed this work-around:

In the Amazon S3 bucket properties, set the Index Document: value to something arbitrary (I used 'index.htm' and didn't have a index.htm file present in the 'root' of the bucket. Then set the Error Document: value to wherever you want the user sent to (test_folder/index.html in your case).

Remember, any 404 error message on your site will be sent to the specified page. I know this is a horrible work around, but it seems to work for me. Any other suggestions gratefully accepted!

How do I configure an S3 Bucket for static website hosting , html and for error document, type error.html . This means that the index.html object stored on this bucket will be served at the root of your website. If there  Of course, S3 doesn't have default directory listing page functionality. In contrast to the index document, the error document, if you configure it, is a global configuration that is used regardless of where, within the bucket, the 404 occurs, so slashes are supported in that entry.

I have been trying to do the same thing (serve static from s3) and reading this post made me realize that you need to place the index file (e.g. 'index.html') in the bucket outside of any folders.

I had my index document in a templates folder. I had read the documentation but I was so frustrated that I couldn't understand what it was really saying. Sometimes, the really stupid mistakes are the most difficult to troubleshoot. Hope this helps somebody.

S3 static website index document, S3 bucket for website hosting and then upload your website content to the bucket. When you configure a bucket as a static website, you must enable website hosting, set permissions, and create and add an index document. Step 7: Try Accessing the File Again. It is time to access the “objects” stored in the S3 bucket again after updating the appropriate permissions.In our case, we have to access the “index.html“, and from the picture below we can confirm that the S3 bucket is working as the content holder for our “static website” and it is also showing other referenced elements like “geekylane1

try to fill index.html in the "Index Document" cell.

S3 Exercise 2.1: Host a Static Website on S3 - Kerry Sheldon, How do I setup a s3 bucket for my website? Amazon S3 stands for Amazon Simple Storage Service. AWS S3 service is one of the foundational building block for other AWS functionalities and offerings in AWS eco-system. What many people may not realize is that one can also host static websites on this robust platform. Basically, a static website is comprised of only HTML, CSS, and/or JavaScript.

The alternate way is If you are using(or use) cloudfront with S3, you can have

DefaultRootObject: test_folder/index.html

This way your cloudfront url https://yourdomain/ will return test_folder/index.html

Hosting a static website on Amazon S3, What is the command to copy files recursively in a folder to an s3 bucket? You can host a static website in an Amazon Simple Storage Service (Amazon S3) bucket. However, to do so requires some configuration. Some optional configurations are also available, depending on your website requirements. Required configurations: Enabling Website Hosting. Configuring Index Document Support.

Setup AWS S3 static website hosting using SSL (ACM), html and point your CF distribution to static website url ( '${bucket}.s3-website-${​AWS::Region}.amazonaws.com') instead of relying on internals of AWS. In Index document, enter the name of the index document, typically index.html. When you configure a bucket for website hosting, you must specify an index document. Amazon S3 returns this index document when requests are made to the root domain or any of the subfolders.

Copy all Files in S3 Bucket to Local with AWS CLI, Index document will be returned for requests made to the root of your website or for any subdirectory. For example, a GET request made to the following URI (  Directory Listing in S3 Static Website. Ask Question Asked 8 years, 3 months ago. Active 2 years, Setting index document on S3 website with custom domain. 2.

How to serve up index.html files in subfolders with S3 static hosting , for example suppose I have a file "test index.html" and I want to set this as the index document for static website hosting, how do I do this? S3 Static Website Hosting Route All Paths to Index.html. Asked 6 years, 10 months ago. Active 3 days ago. Viewed 81k times. I am using S3 to host a javascript app that will use HTML5 pushStates. The problem is if the user bookmarks any of the URLs, it will not resolve to anything. What I need is the ability to take all url requests and serve up

Comments
  • the reason why I want to point the index document to my test_folder/index.html coz inside my bucket I have other folders. And also when I access my browser http://mybucket/test_folder gave me an Access Denied Issue
  • This seems to be a very long-winded answer to say "put your index.html in the root directory".
  • You may want to read it again, then, because that's not really what it says. The index document name is a name, not a path. Put them wherever you need them, but understand that unlike the error document, they are qualified/resolved contextually.
  • I am no stranger to clever hacks, and this is fairly clever, but the problem is that this may not work across browsers, because even though S3 returns the specified error page's content, it still sets the HTTP response code to 404 Not Found: "However, note that when an error occurs, some browsers display their own error message, ignoring the error document Amazon S3 returns. For example, when an HTTP 404 Not Found error occurs, Chrome might display its own error ignoring the error document that Amazon S3 returns." docs.aws.amazon.com/AmazonS3/latest/dev/…
  • @Michael-sqlbot that's correct, but you can use CloudFront for changing the error code to 200
  • @hcarreras that's also true though it's really not good to return the wrong code. This comment of mine is quite old, and my advice today would be to verify that the error document is of sufficient length to suppress any built-in errors, with a large comment block if necessary.
  • HA! I was looking at the suggested text, not realizing it wasn't filled out already. Thanks!