Addressing localhost from a VirtualBox virtual machine
I have a local test/development server (HTTP, of course), listening to port 8000.
I'm working on Linux, so to test the page on Internet Explorer 6, 7, 8, etc. I run a virtual machine using VirtualBox; I also need to see how it look on Firefox in a windows environment (fonts for instance are different).
In my real machine, I open the website simply using the URL
http://localhost:8000, how do I address this localhost from the virtual machine?
Right now my workaround is to use the IP address. Any better ideas?
Googling turned this up: http://data.agaric.com/localhost-from-virtualbox-xp-install-ubuntu
It suggests using IP:
http://10.0.2.2, and it worked for me.
So, I edited the hosts file,
C:\windows\system32\drivers\etc\hosts, and added this entry:
If you're testing on IE8, remember to put
http:// in the address bar. Just putting the ip directly will not work.
Addressing localhost from a VirtualBox virtual machine, That way the virtual machine will get its own IP-address, and you should be able to connect to the host machine. Right click on the Virtual You’ll also need Virtualbox. On Virtualbox, make sure your network adapter is set to NAT. On your Windows VM, your internet connection to google.com should be working. Get your `gateway IP address` for your Windows VM. To do so, click on the Windows start menu. Type `Command Prompt` in the search field.
I'm running Virtual Box on macOS (previously OS X), using Virtual Box to test IE on Windows, etc.
Go to IE in Virtual Box and access
I kept Network settings as NAT, no need for bridge as suggested above in my case. There is no need to edit any config files.
virtualbox, So switch to your VM and find out its IP address. Then open a browser in your host OS and type in the IP address (plus the port if needed). For To enable this on OSX I had to do the following: Shut your virtual machine down. Go to VirtualBox Preferences -> Network -> Host-only Networks -> click the "+" icon. Click OK. Select your box and click the "Settings" icon -> Network -> Adapter 2 -> On Once you start your box up again, you
To enable this on OSX I had to do the following:
- Shut your virtual machine down.
- Go to
VirtualBox Preferences -> Network -> Host-only Networks ->click the "+" icon. Click OK.
- Select your box and click the
"Settings" icon -> Network -> Adapter 2 ->On the "Attached to:" dropdown, select "Host-only Adapter" and your network (
vboxnet0) should show up below by default. Click OK.
- Once you start your box up again, you should be able to access localhost at
You can refer to it by
localhost and access other localhosted sites by adding their references to the hosts file (
C:\windows\system32\drivers\etc\hosts) like the following:
10.0.2.2 localhost 10.0.2.2 subdomain.localhost
Access your VirtualBox guest localhost from your host OS (Example), On guest machine's browser type http://10.0.2.2 which will show you the same content as adapter was set to the .1 address for the ip range so my virtual box host only Well you can get Debian to hit your webserver, but not using localhost. Get the IP for the machine running Apache (inet addr: in ifconfig) and enter that in the virtual box browser address bar. To enable this on OSX I had to do the following: Shut your virtual machine down. Go to VirtualBox Preferences -> Network -> Host-only Networks -> click the "+" icon. Click OK.
You most likely have your virtual machine’s networking set to NAT. If you set your networking to Bridged you should be able to access your host machine by its hostname. For example, if your hostname is "jsmith-Precision-7510" and you want to open http://localhost:3000/, you will be able to view that page at http://jsmith-Precision-7510:3000/.
To find your hostname, open a terminal/console and then run the command
hostname. Your hostname will be outputted on the next line.
See the VirtualBox documentation for instructions on how to set your networking setttings to Bridged.
VirtualBox guest OS accessing local server on host OS, Typing in http://localhost into IE in the virtual machine results in the error set to host-only you will get an ip address and can use that to access My local stack includes MAMP, VirtualBox and ModernIE. ModernIE is great for cross-browser testing, but you have configure your “hosts” file. Here are the steps to get localhost working through VirtualBox: 1) Click on “settings -> network” 2) Select “bridged adapter” from the dropdown. 3) Boot up your virtual machine
I had to go into virtualbox and change my network settings to 'NAT'. After that, I was able to hit
localhost running on my host machine from my emulator on virtualbox through
virtualbox.org • View topic, In my real machine, I open the website simply using the URL http://localhost:8000, how do I address this localhost from the virtual machine? Right now my You can use bridged networking mode instead — in bridged mode, the virtual machine will appear as a separate device on your network and have its own IP address. To change a virtual machine’s network type in VirtualBox, right-click a virtual machine and select Settings.
Addressing localhost from a VirtualBox virtual machine, I have a local test/development server (HTTP, of course), listening to port 8000. I'm working on Linux, so to test the page on Internet Explorer 6, The virtual machine receives its network address and configuration on the private network from a DHCP server integrated into VirtualBox. The IP address thus assigned to the virtual machine is usually on a completely different network than the host. As more than one card of a virtual machine can be set up to use NAT, the first card is connected
Addressing localhost from a VirtualBox virtual machine, Allowing port 8000 to be accessed outside of the VirtualBox VM is not specific to Sandbox 2.4/2.5 version. It's a Virtual Box preference.The port The virtual machine receives its network address and configuration on the private network from a DHCP server integrated into Oracle VM VirtualBox. The IP address thus assigned to the virtual machine is usually on a completely different network than the host.
How can I access the VM's localhost from my host m, Use this address in the browser bar of the host machine followed by Now you run the virtual box instance and then what fsckin sugested to Accessing Virtual Machine using SSH via a Terminal Open up a terminal in your host system. This is usually the application called Terminal in Linux or OSX; start PuTTY if in Windows. Now connect using the SSH client to localhost and port 2201 (or whichever you choose in Port Forwarding).