ImportError: Could not import the Python Imaging Library (PIL) required to load image files on tensorflow

importerror: could not import pil.image. the use of `load_img` requires pil.
importerror cannot import name image from pil
python install from pil import image
conda install pil
pil (python)
adding pil to python
pil install error
no module named pil - raspberry pi

I am doing a deep learning course on udacity. For the first assignment whenI tried to run the script which is below the problem 1 , I got this error. So I tried to uninstall PIL and pillow and then installed these individually but I didnot succeeded. I need help guy. I am using tensorflow docker image with python notebook.

# These are all the modules we'll be using later. Make sure you can import them
# before proceeding further.
from __future__ import print_function
import matplotlib.pyplot as plt
import numpy as np
import os
import sys
import scipy
import tarfile
from IPython.display import display, Image
from scipy import ndimage
from sklearn.linear_model import LogisticRegression
from six.moves.urllib.request import urlretrieve
from six.moves import cPickle as pickle
# Config the matplotlib backend as plotting inline in IPython
%matplotlib inline 

url = 'http://commondatastorage.googleapis.com/books1000/'
last_percent_reported = None

def download_progress_hook(count, blockSize, totalSize):
    percent = int(count * blockSize * 100 / totalSize)

   if last_percent_reported != percent:
     if percent % 5 == 0:
  sys.stdout.write("%s%%" % percent)
  sys.stdout.flush()
else:
  sys.stdout.write(".")
  sys.stdout.flush()

last_percent_reported = percent

https://github.com/tensorflow/tensorflow/blob/master/tensorflow/examples/udacity/1_notmnist.ipynb

You can see the code here. I got error in the code block after problem 1 Error Image

I tried each and everything describe here in these two links or solutions:

Solution 1 on stackoverflow

Solution 2 on stackoverflow

Operating System:

using docker and tensorflow is installed in a container with IPython notebook.

The output from python -c "import tensorflow; print(tensorflow.version)".

0.11.0


pip install pillow

Then replace from IPython.display import display, Image with from IPython.display import display from PIL import Image

Could not import the Python Imaging Library (PIL) required to load , NOTE: Only file GitHub issues for bugs and feature requests. Could not import the Python Imaging Library (PIL) required to load image files #6266 http://​stackoverflow.com/questions/35534220/importerror-could-not-import-the-python-​imaging Because I used tensorflow docker image and It didnot run. ImportError('Could not import PIL.Image. ' working with keras-ternsorflow 18 PIL: ImportError: The _imaging extension was built for another version of pillow or PIL


I met the same problem. But I am using a different setting for the tensorflow. OS: Ubuntu 14.04 LTS. Installation using Anaconda. I solved it by following the warnings in Pillow installation. It may not be useful for a docker installation of tensorflow though.

Here are the steps I did. First enter the tensorflow environment,

source activate tensorflow

Then uninstall PIL and install Pillow

conda uninstall PIL
conda install Pillow

Then in the provided code, replace

from IPython.display import display, Image

by

from IPython.display import display
from PIL import Image

That's all. Re-run the code and it works without PIL error.

ImportError: Could not import the Python Imaging Library (PIL), ImportError: Could not import the Python Imaging Library (PIL) required to load image files on tensorflow? jupyter-kernelspec list. I solved this issue by uninstalling  ImportError: Could not import the Python Imaging Library (PIL) required to load image files on tensorflow 0 OpenCV facemorpher 1.0.1 error: no image output, missing library?


I solved this issue by uninstalling Jupyter and re-installed it properly. The problem was linked to the notebook kernel. My terminal and my notebook didn't have the same kernel. To check it, I did in my virtualenv:

jupyter-kernelspec list

then go to your kernel directories lists and open the json file (something like /Library/Jupyter/kernels/virtualenv/kernel.json)

and check than the Python link is the same than in the output of which python.

If not, create another kernel for your virtualenv.

ImportError: The Python Imaging Library (PIL) is required to load , I don't have a solution for now but do think it should not be to complicated to find. Connection, line line 6, in ? from PIL import Image ImportError: No module This file is in the Nov 17, 2017 · “Pillow is a fork of PIL, the Python Imaging Library​, modules check in _load_module_shim; always load new extension Other no  I have the same problem with the tensorflow/tensorflow:0.12.1 image. In older images Pillow was included but it's missing in newer images. I checked the Dockerfile and it contains the instructions to install Pillow but the image from docker hub is build without.


As for Windows users who use Anaconda, there is likely a simple solution to your problem. If you've installed 'tensorflow' with pip, or a pip variant (ie. pip3), then you will have to install tensorflow again, but this time with the command conda install tensorflow.

Importerror no module named, This doesn't seem to have a resolution and I don't understand the comment on it 3 I know it's installed, but why is python not finding the django module? Hi there, after trying to run a python file I got this error: Error:Import Error: No module Nov 17, 2017 · “Pillow is a fork of PIL, the Python Imaging Library, which is no  sudo apt-get install python-PIL. Check this package is install or not. If it is installed than try to remove with the command: sudo apt-get remove python-PIL. Check this will work to remove the PIL/pillow package is removed from your system. And finally this command will help you to solve this package problem: sudo apt-get autoremove python-PIL


Install PIL in anaconda, then:

from PIL import Image
model.fit_generator(
        train_generator,
        steps_per_epoch=2000 // batch_size,
        epochs=50,
        validation_data=validation_generator,
        validation_steps=800 // batch_size)
model.save_weights('first_try.h5') 

output will display like: Epoch 1/50
 34/125 [=======>......................] - ETA: 7:23 - loss: 0.7237 - acc: 0.5478 ... comntinue 

Modulenotfounderror no module named library django, Aug 30, 2018 ImportError: Could not import the Python Imaging Library (PIL) required to load image files on tensorflow python python2. Scipy ndimage.imageread cannot find PIL in Python3 #7347. ("Could not import the Python Imaging Library (PIL)" 26 " required to load image files. Please refer to"


Python pil install error, I then install Blender (2. py" (and another file) IN the lib/tkinter folder. org (2. egg files. C ImportError: cannot import name getoutput ( I have Neuron successful Aug 21, 2018 · [Python, Tensorflow] How to fix DLL load failed, No module 0 and later. from PIL import Image “Pillow is a fork of PIL, the Python Imaging Library  The friendly PIL fork (Python Imaging Library). Contribute to python-pillow/Pillow development by creating an account on GitHub.


Module not found error python windows, Loads an image into PIL format. path: Path to image file. grayscale: target size is different from that of the loaded image. ImportError: if PIL is not available​. Hey, scipy raises this error if PIL/Pillow can't be loaded: ImportError: Could not import the Python Imaging Library (PIL) required to load image files. Please refer


tf.keras.preprocessing.image.load_img,