Installing scikits.samplerate fails
pip install libsamplerate
python samplerate module
python samplerate resample
I'd like to use "scikits.samplerate", but installation fails. I'm using Windows10 (64 Bits) for Python 3.51 with Anaconda.
Firstly, I followed this instruction: https://scikits.appspot.com/samplerate
>pip install scikits.samplerate Collecting scikits.samplerate Using cached scikits.samplerate-0.3.3.tar.gz Complete output from command python setup.py egg_info: SamplerateInfo: libraries samplerate not found in c:\users\username\anaconda3\lib libraries samplerate not found in C:\ libraries samplerate not found in c:\users\username\anaconda3\libs Traceback (most recent call last): File "scikits\samplerate\setup.py", line 15, in configuration sf_config = sf_info.get_info(2) File "c:\users\username\anaconda3\lib\site-packages\numpy\distutils\system_info.py", line 568, in get_info raise self.notfounderror(self.notfounderror.__doc__) numpy.distutils.system_info.NotFoundError: Some third-party program or library is not found. During handling of the above exception, another exception occurred: Traceback (most recent call last): File "<string>", line 1, in <module> File "C:\Users\username\AppData\Local\Temp\pip-build-9sjnkaf5\scikits.samplerate\setup.py", line 74, in <module> classifiers = CLASSIFIERS, File "c:\users\username\anaconda3\lib\site-packages\numpy\distutils\core.py", line 135, in setup config = configuration() File "C:\Users\username\AppData\Local\Temp\pip-build-9sjnkaf5\scikits.samplerate\setup.py", line 59, in configuration config.add_subpackage(DISTNAME) File "c:\users\username\anaconda3\lib\site-packages\numpy\distutils\misc_util.py", line 1002, in add_subpackage caller_level = 2) File "c:\users\username\anaconda3\lib\site-packages\numpy\distutils\misc_util.py", line 971, in get_subpackage caller_level = caller_level + 1) File "c:\users\username\anaconda3\lib\site-packages\numpy\distutils\misc_util.py", line 908, in _get_configuration_from_setup_py config = setup_module.configuration(*args) File "scikits\samplerate\setup.py", line 20, in configuration [samplerate].""") numpy.distutils.system_info.NotFoundError: SRC (http://www.mega-nerd.com/SRC/) library not found. Directories to search for the libraries can be specified in the site.cfg file, in section [samplerate]. ---------------------------------------- Command "python setup.py egg_info" failed with error code 1 in C:\Users\username\AppData\Local\Temp\pip-build-9sjnkaf5\scikits.samplerate\
... Next, I followed this instruction: https://anaconda.org/hcc/scikits.samplerate
>conda install -c hcc scikits.samplerate=0.3.3 Using Anaconda Cloud api site https://api.anaconda.org Fetching package metadata: ...... Solving package specifications: . Error: Package missing in current win-64 channels: - scikits.samplerate 0.3.3* You can search for this package on anaconda.org with anaconda search -t conda scikits.samplerate 0.3.3*
... so, I serached:
[Anaconda3] C:\Users\username>anaconda search -t conda scikits↲ Using Anaconda Cloud api site https://api.anaconda.org↲ Run 'anaconda show <USER/PACKAGE>' to get more details:↲ Packages:↲ Name | Version | Package Types | Platforms↲ ------------------------- | ------ | --------------- | ---------------↲ HCC/scikits.samplerate | 0.3.3 | conda | linux-64↲ : A python module for high quality audio resampling↲ anaconda/scikits-image | 0.7.1 | conda | linux-64, win-32, win-64, linux-32, osx-64↲ davidbgonzalez/scikits.talkbox | 0.2.5 | conda | linux-64↲ desilinguist/scikits-bootstrap | 0.3.1 | conda | linux-64, osx-64↲ krisvanneste/scikits.timeseries | 0.91.3 | conda | win-64↲ lukepfister/scikits.cuda | master_2016.2 | conda | linux-64↲ : Python interface to GPU-powered libraries↲ menpo/scikits.sparse | 0.2 | conda | linux-64, osx-64↲ miguelalexanderdiaz/scikits.cuda | 0.5.0b1 | conda | linux-64↲ : Python interface to GPU-powered libraries↲ poppy-project/scikits.samplerate | 0.3.3 | conda | linux-armv7l↲ : Simple Hamming Marker Detection using OpenCV↲ rgrout/scikits.bootstrap | 0.3.2 | conda | linux-64, osx-64↲ : Bootstrap confidence interval estimation routines for SciPy.↲ Found 10 packages↲ ↲ [Anaconda3] C:\Users\username>anaconda show poppy-project/scikits.samplerate↲ Using Anaconda Cloud api site https://api.anaconda.org↲ Name: scikits.samplerate↲ Summary: Simple Hamming Marker Detection using OpenCV↲ Access: public↲ Package Types: conda↲ Versions:↲ + 0.3.3↲ ↲ To install this package with conda run:↲ conda install --channel https://conda.anaconda.org/poppy-project scikits.samplerate↲ ↲ [Anaconda3] C:\Users\username>conda install --channel https://conda.anaconda.org/poppy-project scikits.samplerate↲ Using Anaconda Cloud api site https://api.anaconda.org↲ Fetching package metadata: ......↲ Solving package specifications: .↲ Error: Package missing in current win-64 channels:↲ - scikits.samplerate↲ ↲ You can search for this package on anaconda.org with↲ ↲ anaconda search -t conda scikits.samplerate↲
... I have done what I was told, but still it fails. Does anyone have a solution? Is this really installable?
I am not sure if this would work, but glad if it does. Have you tried to edit the site.cfg file and try the installation again.This is what line 20 error in your question says as well.
The user here has done it on Ubuntu, maybe a similar approach works for Windows as well.
You first need to install the SRC library: sudo apt-get install libsamplerate0 libsamplerate0-dev This python package will probably be the most tricky to install. If you are lucky, you can just pip install scikits.samplerate On my Ubuntu 12.04, this results in an error because the SRC library path is not found. The reason is that the setup searches SRC in /usr/lib and not in /usr/lib/x86_64-linux-gnu where the library is actually present. To install, you need to download the archive from pypi and edit some configuration file: wget https://pypi.python.org/packages/source/s/scikits.samplerate/scikits.samplerate-0.3.3.tar.gz#md5=96c8d8ba3aa95a9db15994f78792efb4 tar -xvf scikits.samplerate-0.3.3.tar.gz cd scikits.samplerate-0.3.3 then edit the site.cfg example file and insert the following lines: [samplerate] library_dirs=/usr/lib/x86_64-linux-gnu include_dirs=/usr/include To know where the SRC library is on you machine: sudo dpkg -L libsamplerate0 sudo dpkg -L libsamplerate0-dev then, build and install: python setup.py build python setup.py install
scikits.samplerate dependency · Issue #67 · librosa/librosa · GitHub, The scikits.samplerate dependency in librosa is a soft dependency, libsamplerate from source, so the entire install chain for librosa fails. The scikits.samplerate dependency in librosa is a soft dependency, meaning that it will fall back gracefully (and slowly) on scipy.signal's resampler. The reason for the soft dependency is that the pypi package does not automatically install libsamplerate from source, so the entire install chain for librosa fails.
installation failed.. · Issue #1 · kylemcdonald/AudioNotebooks · GitHub, while attempting to install requirements I got tripped up looking for samplerate /T/pip-build-mx_tg_v6/scikits.samplerate/setup.py", line 59, in configuration This is only vaguely related to audiolab but I have the same problem for installing scikits.samplerate on windows 7. It isn't just specific to audiolab. This comment has been minimized.
For Centos7 when I had that error I did:
yum install libsamplerate-devel libsamplerate
scikits.samplerate · PyPI, scikits.samplerate 0.3.3. pip install scikits.samplerate. Copy PIP instructions. Latest version. Released: Jul 22, 2009. A python module for high quality audio Dismiss Join GitHub today. GitHub is home to over 40 million developers working together to host and review code, manage projects, and build software together.
For Windows I am using Miniconda2 and in order to get librosa to work installed ffmpeg using this command:
conda install -c conda-forge ffmpeg
librosa error after seaborn installation -- scikits.samplerate, I have reinstalled libsamplerate and scikits.samplerate but the problem persists. the seaborn installation updated a handful of packages:. scikits nightmares on Windows. Hi, I'm trying to install some scikits on Windows PC (XP3 32b) scikits.samplerate: ~~~~~ After running 'easy_install scikits.samplerate' or 'pip
[MSNoise] Installation of scikits.samplerate, >pip install scikits.samplerate Collecting scikits.samplerate Using cached Command "python setup.py egg_info" failed with error code 1 in Welcome to SciKits! Here you'll find a searchable index of add-on toolkits that complement SciPy, a library of scientific computing routines.. The SciKits cover a broad spectrum of application domains, including financial computation, audio processing, geosciences, computer vision, engineering, machine learning, medical computing and bioinformatics.
Python Extension Packages for Windows, MSNoise in my new windows PC(windows 10 Pro) and > have a problem when I attempt to install scikits.samplerate by a > command below: Install the version of scikit-learn provided by your operating system or Python distribution . This is a quick option for those who have operating systems or Python distributions that distribute scikit-learn. It might not provide the latest release version. Building the package from source. This is best for users who want the latest-and
>pip install scikits.samplerate Collecting scikits.samplerate Using cached scikits.samplerate-0.3.3.tar.gz Complete output from command python setup.py To workaround this issue, use the following steps. If one does not help, move to the next one: If using an Install Now installer for your Autodesk product, try using the Browser Download or Download Now method to get the complete installation package, and then retry the install.
- I think this is related to github.com/cournape/samplerate/issues/8
- Unfortunately, the info is not enough. I downloaded "scikits.samplerate-0.3.3.tar.gz" from pypi.python.org/pypi/scikits.samplerate. Extracted the tar and put it under C:\Users\username\Anaconda3\pkgs (I'm not sure if this is the right place). I modified "site.cfg.example" as you said. However, there is no dpkg command since I'm not using Ubuntu. It seems that a solution for Ubuntu cannot be a solution of Windows this time. Thanks, though.
- i assume u used the file explorer to navigate to the path of SRC library(the windows equivalent of finding the path) and then replaced with path in windows format C:\users\Program files x 86\anaconda\lib (or like that) rather than using the one in the example. Sorry it didn't work out.
- Thanks for trying to help me, but again, a Linux solution cannot be a Windows solution. I already tried it (to compile the source code with Visual Studio C++) and it didn't work at all. Please check this author's profile. He is a real Windows-hater. He didn't compile the Windows version on purpose. He asked money to compile for Windows without saying how much is enough. If we pay more, he work harder. That's it. I don't need this bullshit any more.