Unable to update R packages in default library on Windows 7

Unable to update R packages in default library on Windows 7

lib = c:/program files r r 3.6 0 library''' is not writable
r/win-library
r studio default library
unable to install packages in r
personal library r
how to set library for r
how to move r library
rstudio install package

I'm trying to update packages on RGui (64-bit) using update.packages but I'm getting the following message:

Warning in install.packages(update[instlib == l, "Package"], l, contriburl = contriburl,  :
  'lib = "C:/PROGRA~1/R/R-212~1.1/library"' is not writable
Error in install.packages(update[instlib == l, "Package"], l, contriburl = contriburl,  : 
  unable to install packages

I've looked at the library folder in Explorer and it has read only set, so I removed it. However, it reappears when I check the properties again immediately after doing this. Installing new packages is unaffected since they have a separate folder in my user profile.

Is there a trick to getting this to work?


Usually you need administrator rights to change things in program files. Try running RGui as administrator.

Installing & Updating Packages in R | NSF NEON, Error in install.packages("devtools") : unable to install packages From R's FAQ Docs, 2.24 Does R run under Windows Vista/7/8/Server 2008? If you use the default Administrator account (without 'admin approval mode'  I’m using your package “installr” and the “updateR()” function wihin the R Console in Windows 7 and Windows 10. During the update process of “updateR()” when choosing to update the packages in the newely installed R, do the packages in the ‘User Library’ of the old R Version also get updated (which have to be copied manually


It happens the same to me, and after coding hours and hours in "R" of Gui Project, i got bored because it is much easier to read a code when the interface uses colours for a certain type of words (commands). Well, i decided to install RStudio, but soon i was faced with package installation problems. It seems that happens in Windows 7. The way that I used to solve this problem with RSutido was:

  1. C:\Program Files\R - and this is the folder that contains "R" and not RStudio folder!
  2. Right click for properties.
  3. Security.
  4. In "Group or user names" select your name
  5. click "Edit"
  6. select "Full control"
  7. Apply and click OK

After this steps you should be ok to install all the packages :-)

Installing and Using R Packages - Easy Guides - Wiki, pssguy April 25, 2018, 7:49am #1 you upgrade to a new minor version of R (​like 3.3.0 to 3.4.0), R will not find the packages, Or is there some package that I could use with the prior version of R to facilitate? lib_loc <- "C:/Users/apdev/​Documents/R/win-library/3.3" to_install Changing the default user package library. Installing Packages in RStudio: Install Path Problem Fix Unable to update R packages in default library on Windows 7 How to Install R, R Studio & R Package on Windows 10 - Duration: 9:30.


try

install.packages('package_name', lib='folder')

you can specify a folder for installation of the libraries, for which you have writing permission.

Hope this helps

Change R default library path using .libPaths in Rprofile.site , The default permissions of a regular user on windows 7 won't let you create folders 1: In dir.create(global.library.folder) : 'library' already exists to use the update function twice until it is able to properly install the package. If you use the default Administrator account (without ‘admin approval mode’ being turned on) and ins tall/update packages (in the system area or elsewhere), no issues are known. If you use an account in the local Administrators group in ‘admin approval mode’ (which is the intended norm under these OSes), installation will make use of ‘over-the-shoulder’ credentials.


Uninstalling from C:\Program Files and re-installing to C:\R worked for me

[See mdsumner's comment and Windows FAQ found here]

"...Users of Vista/Windows 7/8/Server 2008/2012 installing for a single user using an account with administrator rights1 should consider installing into a non-system area (such as C:\R)"

run R as administrator, The {installr} package offers a set of R functions for the installation and If you like using the global library system, you can run the following in the old R: If you have functions for which you'd like to be able to easily install them – just https://www.r-statistics.com/2011/04/how-to-upgrade-r-on-windows-7/ Hello, I can not install any packages in R studio version in 1.1 463 in Windows. as_23 December 2, 2018, 3:25pm #2 Whenever I want to install the packages, I have face following messages in R studio R. 1.1.463. console,


I had this exact problem and just changed it for myself. That is I navigated to C:/PROGRAM/R and then right clicked on the R to bring up properties. Went to the Security tab clicked on the Group/User that you want to add permissions for. That for me was USER then clicked EDIT and then selected the boxes that were unchecked to Allow control over. I had to do this specifically for each user (of course I was running the entire time as administrator). Clicked Apply/OK and all is well. I can now update/install/ new libraries and what have you for this computer without having to run R as the admin.

Error After R Update; 'lib = "C:/Program Files/R/R-3.5.0/library"' is not , 3.5 I would like to be able to use Japanese fonts. 4.1 Can I install packages into libraries in this version? Current binary versions of R are known to run on Windows 7 or later, including on 64-bit versions: See Can I use R on 64-bit Note that the R executables are not by default added to the PATH . Using the default install.packages command can result in a series of frustrating messages like this: ’lib = “<myRlibrary>”’ is not writable. To address these issues, you will need to change the RStudio package library to a location for which you have access permissions. First, launch RStudio. Then, see where your default library currently lies.


Reinstalling packages on new version of R - R Admins, 6.1 Default packages; 6.2 Managing libraries; 6.3 Installing packages Note: you do not need to install R: you can run it from where it was built. This will not be done if the package has an executable configure script or a src/Makefile file. of add-on packages from CRAN to run on 32- or 64-bit Windows (Windows 7 and​  Probably the first time R, unable to write to R default directory, used the personal directory, so that there are two versions of nicePack. The second time, despite the admin privileges, R finds the updated package version in the personal directory and it does not update the default directory.


How to upgrade R on windows 7, I get an error when attempting to install packages: 'lib = "C:/Program Files/RRO/​R-3.2.0/library"' is not writable Error in 2.24 Does R run under Windows Vista/7/​8/Server 2008? If you use the default Administrator account (without 'admin approval Bug: installation fails on Windows 10/R 3.4.3 #47. I am running R on Windows, not as an administrator. When I install a package, the following command doesn't work: To install a package, I have to specify a library location: To load a package, I also have to specify the library location: All of this is OK, but I wanted to see if I could add C:/software/Rpackages to the library path somehow and


Updating R from R (on Windows) – using the {installr} package, Unable to update R packages in default library on Windows 7 http://stackoverflow​.com Duration: 2:38 Posted: Jun 14, 2015 I dislike the suggestions offered here, Unable to update R packages in default library on Windows 7, which are to either run R as an Administrator, or to give User-level permissions to write to C:\Program Files\R\library.